Electrolytic water quality tester accurately analyzes water material and easily identifies TDS values up to 600 ppm. Equipped with a magnetic snap switch and sturdy aluminum and iron rod, perfect for camping and outdoor activities.
Specifications:
Power: 50~300W
Frequency: 50Hz
Voltage: 110V-220V
Type: Water Quality Quick Analyzer
Product Size: about 5.5*3.9*6.8 cm / 2.17*1.54*2.68 inch
Product Features: Can electrolyze water quality up to 600 pm. You can turn off the power at any time
Test range: Water treatment industry, household tap water, water purifier water (RO machine, functional water purifier)
Package Contents:
1 * Water Electrolytic Device
Note:
1. Electrolytic time tds value (recommended) 0 to 70 ppm 60 seconds; 70-120ppm 35 seconds; 120-200ppm 25 seconds; 200-300ppm 15 seconds; it will burn easily over 600ppm and circuit is not suitable for electrolysis.
2. Do not use metal containers to fill water samples. Beware of short-circuit.
3. To prevent electric shock, please do not use this experiment for people other than adults.
4. Do not touch iron rods, aluminum rods, or electrolytic water samples while electrolysis.
5. Please make sure to measure the tds value of water samples before electrolysis. If the tds value exceeds 600ppm, it is not suitable for electrolysis.
6. At the first end, unplug the power supply, take out the electrolyte, and clean the iron rod and aluminum rod at a time. 7. The iron rod is consumables, and the general electrolytic number is not more than that. 5+ times
How to use:
1. Prepare a water sample, prepare 2 clear glass cups with a capacity of 100-150ml. One cup holds regular water (tap water or well water) and the other cup holds mineral water or expertly purified water (such as pure water or water). distilled water) on the table.
2.To prepare for test, place the end of the electrolyte on two glass and connect the power supply.