Feature

●Excellent filling: Excellent heat conductivity, insulation, viscosity, elasticity, low heat resistance, excellent filling
●Application: Pads are placed between the heater and the heat dissipation component, which provides heat transfer and insulation
●EASY TO USE: The pad has viscosity, easy and convenient application, stable heat conduction, insulation, softness and flexibility
●General Purpose: Compatible with graphics card north bridge, home appliances, high speed hard drives, micro heat pipe radiators, high output power supply, LED industry
●Insulation: Thermal conductive silicone sheets have excellent thermal conductivity and meet the insulating requirements of most electronic products


Description

Specifications:
Item Type: Heat Transfer Pads
Size: 100 x 100 x 0.5mm / 3.94 x 3.94 x 0.02in
Color: Blue
Thickness Tolerance: 0.2+-0.01
Continuous operating temperature: -50 - 200 degrees Celsius
Conductivity: 1.5W/m-k
Mass resistance ratio: 10^12
Breaking Voltage: 4.5KV
Hardness: 30±5 Shore A
Ratio: 2.05
Tensile strength: 15 kg/cm2
Stretch: 48%
Flame Retardant Grade: 90V-0-1

User Manual:
1. Clean surface
It is glued or cleaned to the surface of an object to remove dust and oil.
2. Peel off the protective film
The left hand pinch the protective film on the side of the product with your right hand and can not tear the protective film on both sides simultaneously, reducing the number and area of direct contact with the silicone sheet, preventing damage to the product. Product viscosity and thermal conductivity
3. Fixing the heat sink
After installation, peel off the protective film on the other side, apply certain pressure to the heat sink and fix it with screws.


Packing List:
5 x Heat Conduction Pads