Feature

●Thermal Conductive Pad Thermal Conductive Silicone Sheet has excellent thermal conductivity and meets the insulating requirements of most electronic products
●Heat Transfer Pad: This pad is specially designed for use with heat transfer through the gap to fill the gap and transfer heat of the heating components effectively
●The thermal conductive pad is applied to the northern bridge of graphics cards, consumer electronics, high speed hard drives, micro heat pipe radiators, high output power supply, and LED industries
●Heat conduction pads have excellent heat conductivity, insulation, viscosity, elasticity, low heat resistance, and filling
●Heat transfer pad has viscosity, easy and convenient application, stable heat conduction, insulation, softness and flexibility. The pad is placed between the heater and the heat dissipation cover for heat transfer and insulation


Description

Specifications:
Item Type: Thermal Conductive Pads
Size: 100 x 100 x 0.5mm / 3.94 x 3.94 x 0.02in
Color: Blue
Thickness Tolerance: 0.2+ -0.01
Continuous operating temperature: -50 - 200 degrees Celsius
Conductivity: 1.5W/m-k
Mass resistance ratio: 10 - 12
Withstanding Voltage: 4.5 KV
Hardness: 30±5 Shore A
Proportion: 2.05
Tensile strength: 15 kg/cm2
Stretch: 48%
Flame Retardant Grade: 90V-0-1
User Manual:
1.Clean the surface. It is glued or cleaned to the surface of an object to remove dust and oil.
2. Peel off the protective film
Left hand can remove the protective film from the product side with your right hand, and the protective film can not be broken at the same time, reducing the number and area of direct contact with the silicone sheet, avoiding damage to the viscosity and thermal conductivity.
3. Fixing the heat sink
After installation, peel off the protective film on the other side, apply certain pressure to the heat sink and fix it with screws.

Packing List:
5 x Heat Conduction Pads