Feature

●Excellent heat conductivity, insulation, viscosity, elasticity, low heat resistance, and excellent filling
●It can be applied to the northern bridge of graphics cards, home appliances, high speed hard drives, micro heat pipe radiators, high output power supply, and LED industries
●At the same time, the product has viscosity and is easy and convenient to apply. Silicone film uses soft silica gel thermal conductor material with stable thermal conduction, insulating properties and soft resilient properties, attached to the heater, and the heat dissipation part provides heat transfer and insulation effect
●Thermal conductive silicone film has excellent thermal conductivity meeting the thermal insulation requirements of most electronic products,specially designed for use with spaced heat transfer design, can fill the spacing, effective heat transfer to the radiator of heating components
●Easy to use, very user friendly, high thermal conductivity


Description

Features:
1. Compatible with graphics card northern bridge and consumer electronics, high speed hard drives, micro heat pipe radiator, high output power supply, LED industry.
2. Heat conductivity, insulation, viscosity, elasticity, low heat resistance, good filling.
3. Thermal conductive silicone film has excellent thermal conductivity meeting the thermal insulation requirements of most electronic products,specially designed for use in spacing heat transfer design, can fill the spacing, effective heat transfer from heating components to radiator
4. At the same time, the product has viscosity and is easy and convenient to apply. Silicone film uses soft silica gel thermal conductor material with stable thermal conduction, insulating properties and soft resilient properties, attached to the heater, and the heat dissipation part provides heat transfer and insulation effect.
5. Easy to use, very user friendly, high thermal conductivity. Color: Blue
Thickness Tolerance: 0.2+-0.01
Continuous operating temperature: -50 - 200 degrees Celsius
Conductivity: 1.5W/m-k
Mass resistance ratio: 10 - 12
Breaking Voltage: 4.5KV
Hardness: 30±5 Shore A
Ratio: 2.05
Tensile strength: 33.1 lbs/cm2
Stretch: 48%
Flame Retardant Grade: 90V-0-1
User Manual:
1.Clean the surface. It will be glued or cleaned to the surface of an object to remove dust and oil.
2. Tear protective film