WZ_SIGNAL signal generator is primarily used for debugging PLC, process instruments, electrical valves, etc. Easy to use Kanji operation interface and easy to use. The signal generator is small and lightweight, but it has a long standby time and high precision.
Features:
Internal reverse and overcurrent protection, 30V protection voltage.
Built-in 3.7V lithium battery power supply. The usage time varies depending on the usage situation (20mA continuous output may be more than 6 hours).
Use the internal battery voltage tip to turn off charging if the (UV light) low voltage light is on.
Please do not use for a long time. Charge once every 2 months.
Charges via Micro USB.
Operating temperature range from 0 to 50 degrees.
Custom Function:
For easy on-site debugging and debugging of the output signals can be set up to the requirements of the device. You can set the upper and lower limit of active 4-20mA output, passive 4-20mA output upper and lower limit of 0-12V output.
Auto Output Function:
This function can change the output mode automatically according to the program. Just set the parameters and it will automatically output It is used for deterioration and automatic testing of valves and other equipment.
This function consists of automatic mode, number of cycles, initial value, increments, decrease value, increment time, decrease time, start point delay, endpoint delay, and end values. Active current, passive current, and voltage output have individual setting parameters to facilitate the setting of a variety of output signals.
VC conversion function:
This function is mainly used for temporary voltage and current conversion, such as converting 0-10V input to 4-20mA output.
VC Active Conversion: Converts voltage signal input to active current signal output; VC passive conversion: Converts voltage signal input to passive current signal output
CV Conversion: Converts current input signal to voltage signal output
The function rules consist of several parts of the VC conversion switch, conversion mode, voltage limit, current limit and overrange.
Specifications:
Name: Signal Generator
Active Current Output: Range: 0-24mA; Resolution: 0.01mA; Maximum Load: 750Ω
Passive Current Output: Range: 0-24mA; Resolution: 0.01mA; External power supply up to 30V
Voltage Output: Range: 0-12V; Resolution: 0.01V; Maximum Current: 30mA
24V Voltage Output: Drive Current: 24mA
Current input measurement: Range: 0-24mA; Resolution: 0.01mA; Input Impedance: 100Ω
Voltage input measurement: Range: 0-30V; Resolution: 0.01V; Input Impedance: 2.5MΩ
Operating Environment: 0°C-50°C
Protection Voltage: 30V
Item size: 3.54 x 2.76 x 1.10 inches (90 x 70 x 28 mm).
Package Size: 5.91 x 3.94 x 3.15in (150 x 100 x 80 mm)
Package weight: 4.23oz (120g)
Package List:
1 x Signal Generator.
3 x Test Cables