This tester adopts high precision electrochemical sensor, quick response, high accuracy, measuring range 0-1000ppm. High brightness screen with backlight, you can see concentration, temperature and power at a glance. The backlight color can be switched between Fahrenheit/Celsius depending on the detection situation. Support Auto Power-Off (APO) Setting, Low Alert (LAL) Setting, High Alert (HAL) Setting. The default time of automatic shutdown is 10 minutes (can be set to close). Alarm setting range is 0-1000ppm.
Features:
High precision sensor: Adopts high-precision electrochemical sensor, quick response, high-precision measurement, with a measurement range of 0-1000 ppm.
Digital LCD Display: High brightness screen with backlight, you can see concentration, temperature and power at a glance. The backlight color can be switched between Fahrenheit/Celsius depending on the detection situation.
SOUND & LIGHT: Two levels (high and low) design. If the concentration is lower than the lower, it will produce a low slow beep sound and motor vibration. If the concentration is higher than high value, it will be issued with a vigorous beep, motor vibration, and the backlight of the display will turn red for warning.
Parameter Setting: Support automatic power off (APO) setting, lower limit (LAL) setting and upper limit (HAL) setting The default time of automatic shutdown is 10 minutes (can be set to close). Alarm setting range is 0-1000ppm.
WIDE APPLICATION: It can detect various gasses and detect concentrations, such as natural gas, gas, liquefied gas, fuel oil, coal, etc.
Application scenario: Suitable for evaporative heating rooms, garage limited space, gas water heaters, cooking gas, etc.
Specifications:
Name: Detector
Material: Plastic
Battery: 3 * 1.5V AAA alkaline batteries (not included)
Range: 0-1000PPM
Resolution: 1PPM
Basic error: ±10% (relative error)
Warm-up time: 30 seconds
Response time: ≤60 seconds
Recovery time: ≤60s
Zero point drift: 0-3PPM
Sampling method: diffusion type
Alarm value, compensation: 2 point field correction
Operating voltage: 4.5 VDC
Working time: >14 hours
Display: Backlit LCD display
Direct measurements: real-time sensor concentration measurement, battery remaining
Alarm setting: Low alarm function, high alarm function setting
: Sound, backlight LED color switch, vibration display, running voltage indicator.
Voice Alert: The higher the frequency of beep, the higher the concentration
Applicable temperature range: -10 °C - 50 °C
Applicable humidity range: <95% RH (non-condensation).
Item size: 130 * 69 * 27mm / 5.12 * 2.72 * 1.06in
Item weight: 135g / 4.76
Package Size: 5.91 x 3.94 x 1.97in (150 x 100 x 50 mm)
Package weight: 150g / 5.29
Package Contents:
1 x Detector
1 x Guideline.