Feature(may vary by option.)
●MULTI INFORMATION DISPLAY: 2.8 inch TFT LCD display more information at the same time. Voltage (output voltage set and actual output), current (output current and actual output), actual output power, cumulative run time, channel output status, etc. When the actual current exceeds the pre-set current value, the power supply will automatically switch to CC mode to protect the circuit
●MULTIPLE PROTECTION: DC power supply is durable. Multiple protections include limited current protection, thermal protection, voltage overload protection, short circuit protection, overpower This greatly improves efficiency and durability
●CONVENIENT USB PORT DESIGN: The power supply can not only be used as an adjustable power supply, but also has a 5V/1A USB output port to charge your phone, and a rear USB device communication port for controlling firmware and PC software
●Adjustable Power Supply: Constant power design, wide application range allows you to configure higher voltage and current flexibility within the rated power range. Programmable power with memory key Features 4 groups of memory shortcut parameters for fast output. Wrist Waveform Editing Output 10 groups timing output
●COMPACT AND LIGHTWEIGHT: The variable lab power supply measures only 3.2 * 8.9 * 5.6 inches, the weight is only about 3.5, saving your workstation space and convenient to carry when you need it
[US Plug 60V 5A]
[US Plug 30V 5A]
[US Plug 30V 10A]
[US Plug 60V 10A]
Description
1mA
Lead back resolution
Voltage: 10mV
Current: 1mA
Value resolution (within 12 months) (77°F (25°C±5°C))
Voltage: ≤0.1%±20mV, ≤0.1%±20mV, ≤0.1%±20mV, ≤0.1%±30mV
Current: ≤0.05%±10mA
Lead back value resolution (25° C ± 5° C)
Voltage: ≤0.1%±20mV, ≤0.1%±20mV, ≤0.1%±20mV, ≤0.1%±30mV
Current: ≤0.1%±10mA
Ripple Noise
Voltage (Vp-p): ≤30mVp-p, ≤30mVp-p, ≤30mVp-p, ≤50mVp-p
Voltage(rms): ≤3mVrms, ≤3mVrms, ≤3mVrms, ≤5mVrms
Current (rms): ≤30mAp-p, ≤30mAp-p, ≤30mAp-p, ≤30mAp-p
Output temperature coefficient (0°C - 40°C)
Voltage: 100ppm/°C, 100ppm/°C, 100ppm/°C, 100ppm/°C
Current: 200 ppm/°C, 200 ppm/°C, 200 ppm/°C, 200 ppm/°C
Leadback Temperature Factor
Voltage: 100ppm/°C, 100ppm/°C, 100ppm/°C, 100ppm/°C
Current: 200 ppm/°C, 200 ppm/°C, 200 ppm/°C, 200 ppm/°C
Response time (50%-100% rated load): ≤1.0m/s
Storage: 4 groups of data
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: -4°F to 140°F (-20°C to 60°C).
Relative Humidity: ≤90%RH; No condensation
Elevation: 2000 meters
Cooling: Fan cooling, temperature intelligent speed control
Communication port: USB communication, compatible with SCPI communication protocol
USB charging port: 5V/1A charging
Multimeter Parameters:
Full scale reading: 4 1/2 digits
Automatic Range: Yes
Measurements: Voltage, Current, Capacitance, Resistance, Continuous, Diode (0-2V) Test
Capacitance: 20.000nF, 200.00nF, 2.000uF, 20.000uF, 200.00uF, 2.000mF: ±(3.0%±10 digit)
Voltage: DCV: 200.00 mV: ± (0.3 % + 10 digits), 2.000 V, 20.00 V, 200.00 V, 1000 V: ± (0.3 % ± 5 digit)
ACV: 200.00 mV, 2.000 V, 20.000 V, 200.00 V: ± (0.8 % + 10 digit) 750 V: ± (1 % ± 10 digit)
Current: DCA: 200.00mA: ± (0.8% ± 10 digits), 10.000A: ± (2.5% ± 10 digit)
ACA: 200.00mA: ± (1% ± 10 digit), 10.000A: ± (2.8% ± 10 digit)
Impedance: 200.00Ω, 2.000kΩ, 20.000kΩ, 200.00kΩ, 2.000MΩ: ±(0.8%±10digit), 20.000MΩ: ±(1%±3digit), 100MΩ: ±(5%±10digit)
Item size: 226 * 82 * 142mm / 8.89 * 3.23 * 5.59in
Item weight: 1584g / 3.49
Package weight: 2060g / 4.54
Package size: 34 * 13 * 19.5cm / 13.39 * 5.12 * 7.68in
Package List:
1 x Programmable DC Power Supply
1 x Power Cord
1 x USB cable.
1 x Multimeter Lead
1 * Ground wire
1 x Fuse
1 x User Manual (English)