Fixture Luminous Flux: 1250 lm
Voltage: 100V
Power consumption: 14.4 W
Consumption efficiency: 86.8 lm/W
Lighting: Aluminum die-cast (black matte finish).
Frame aluminum (outer surface white matte finish, inner surface black matte finish)
Recessed ceiling type, embedded hole: 100 x 200, J12 V 50 type (35 W) fixtures, with light distribution adjustment function, combined with 100 type non-dimmable power supply unit (LE1).
Ra85 compatible power supply unit, non-dimmable type NTS90101, LE1 (sold separately) option, diffusing filter NTS91027 (sold separately) option, diffusion filter NTS91032 (sold separately) Option, spread filter NTS91034 (sold separately)
Oscillation Range: Approx. 104°F (45°C).
Horizontal rotation range: Approx. 355 degrees.
Embedded type
Universal type.
With light distribution adjustment function (13 - 32 degrees).
For ceiling mounting only.
Cannot be used with diffuser filters, diffusion filters, or spread filters.
Rated value is factory set (17° medium angle). Performance values vary based on light distribution.
Note: Please be sure to use in combination with the compatible power unit. Requires one light
Note: Not dimmable.
Note: Close to 11.8 inches (30 cm)
Note: This product is not designed for insulation.
Note: When installing, the embedded height must be greater than 7.1 inches (180 mm).
Note: Since the wire is raised upward from the fixture, please install it in a location with a height of 7.1 inches (180 mm) from the ceiling plate without obstacles.
Note: The angle of the light distribution is required to be adjusted at the site.
Note: Since LED variants are not calibrated same, the color and brightness of the product may differ from product to product.