Can be installed in ceiling and wall surfaces (vertical and horizontal) directions (equipment with sensor function has limited mounting direction).
It reduces the glare on the front of the fixture while ensuring the light to the wall, achieving a natural, soft and uniform light spread.
Compared to conventional fluorescent fixtures, this product achieves a beautiful luminous surface that shines evenly around the edge of the fixture.
The LED light source and power supply seal inside the cover, keeping insects out. It maintains its beautiful appearance even when it is on, saving you the hassle of cleaning.
The cover is made of polycarbonate resin, so it is resistant to impacts.
LED (daylight white)
Color Temperature: 5000K
Light source life: 40,000 hours (luminous flux maintenance rate of 85%)
Width: 4.3 inches (109 mm)
Length: 24.8 inches (627 mm)
Drawer: 3.9 inches (100 mm)
Weight: 4.4 lbs (2 kg)
Fixture Luminous Flux: 1920 lm
Ballast output type: High output type
Ballast supplement:
Voltage: 100-242V
Power consumption: 19W
Consumption efficiency: 101 lm/W
Main unit: Stainless steel.
Cover: Polycarbonate (milky white).
EE sensor function, one (heat wire) sensor included.
IP23
Ra83
Not dimmable.
On/Off Single Sensor (N Type)
Note: Cannot be mounted outside of the photo orientation.
Note: Can be used in rain lines such as under eaves. But please do not use it in: It may cause drops, electric shocks, and fire. It cannot be used in windy places such as rooftops, mountains, bridges, commercial bathrooms and saunas, places that are exposed to constant high temperatures and high humidity, hot springs and other places where corrosive gases are generated, such as coastal areas where salt damage caused by salt wind, areas exposed to chlorine atmosphere, such as indoor pools, and places with strong vibrations.
Note: Since LED are variable, the color and brightness of the same product may differ from product to product.