[6.35mm]
3/3.17/4/5/6/7/8/10/11/12/14mm Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector Shaft Shaft Bearing Fitting
Features:
Material: 45# steel, hardened by heat treatment, then electroplating
Inner Diameter: 0.4 inches (10 mm)
Cylinder diameter: 0.7 inches (18 mm)
Total Height: 0.5 inches (13 mm).
Bottom Diameter: 1.3 inches (32 mm)
Fixing Hole Screw: M4
Fixed hole distance: 1.0 in (26 mm)
Inner Diameter: 0.1 inches (3
Cylinder diameter: 0.4 inches (10 mm)
Total Height: 0.5 inches (12 mm).
Bottom diameter: 0.9 inches (22 mm)
Fixing hole screw: M3
Fixed hole distance: 0.6 inches (16 mm)
Inner Diameter: 4mm
Cylinder diameter: 0.4 inches (10 mm)
Total Height: 0.5 inches (12 mm).
Bottom diameter: 0.9 inches (22 mm)
Fixing hole screw: M3
Fixed hole distance: 0.6 inches (16 mm)
Inner Diameter: 0.2 inches (5
Cylinder diameter: 0.4 inches (10 mm)
Total Height: 0.5 inches (12 mm).
Bottom diameter: 0.9 inches (22 mm)
Fixing hole screw: M3
Fixed hole distance: 0.6 inches (16 mm)
Inner diameter: 0.2 inches (6
Cylinder diameter: 0.4 inches (10 mm)
Total Height: 0.5 inches (12 mm).
Bottom diameter: 0.9 inches (22 mm)
Fixing hole screw: M3
Fixed hole distance: 0.6 inches (16 mm)
Inner Diameter: 0.3 inches (7
Cylinder diameter: 0.6 inches (16 mm)
Total Height: 0.5 inches (13 mm).
Bottom Diameter: 1.3 inches (32 mm)
Fixing Hole Screw: M4
Fixed hole distance: 1.0 in (26 mm)
Inner Diameter: 8mm
Cylinder diameter: 0.6 inches (16 mm)
Total Height: 0.5 inches (13 mm).
Bottom Diameter: 1.3 inches (32 mm)
Fixing Hole Screw: M4
Fixed hole distance: 1.0 in (26 mm)
Package Content: 1 x Coupler
Note:
Please allow 1-3mm error due to manual measurement. Please make sure you do not mind before bidding.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!