Feature

●PREVENT THE IMPACTS OF SHRAVES: This filter is primarily to remove FM and prevent the effect of short waves, very useful for communication systems
●Reject 88‑108MHZ Signal: This band stop filter rejects the signal between 88‑108MHZ with an attenuation of about 50dB
●Aviation Frequency Aviation: This FM band stop filter also affects the aviation frequency. When you raise the gain, you will see the image of the BCFM station and look like interference from WFM signals of other frequencies
●SUITABLE FOR SDR: Broadcast FM signals are very strong in some areas, and the SDR will overload and the performance on other frequency bands is very decrease in the broadcast FM band removal filter is convenient to use with SDR
●Bidirectional interface: SDR FM filter is equipped with a bi-directional interface, which can provide aviation frequency suppression signal interference


Description

How to use:

Specifications:
Item Type: Band Stop Filter
Material: ABS, PCB
Broadcast FM bandstop filters are convenient to use with SDR because broadcast FM is not used in some areas. Very strong signals will overload the SDR and greatly reduce performance in other frequency bands. When you raise the gain, you can see the BCFM station image that looks like a WFM signal that other frequencies are interfering with when you raise the gain.

Package List:
1 x Band Stop Filter
1 x Bi-Directional Interface

Note:
Please be aware of the correct operation.