●★ Manual Tap Dimension ---Thread Size: M18 x 2.5 (Right Hand); Square Handle Width: 11.5mm; Thread Length: 36mm; Overall Length: 82mm ●★ UNIVERSAL --- Use for blind taps or shallow blind taps. Vertical groove design, downward debris Make a new female or rescrew is damaged or stagged female thread. Used for screwing aluminum, mild steel, copper, hard plastic, etc ●★ MANUAL TAP --- Tap wrench uses manual tap. Taper taps begin to tap the screw thread right angle with the workpiece, usually used for drilling holes, and the bottom tap forms a screw thread at the bottom of the hole ●★ Alloy Tool Steel --- Alloy tool steel (9SiCr) tap has high hardness, high torque, good toughness and abrasion resistance, suitable for general use ●★ Useful Tips --- The surface of the faucet is rust-tan coating, belong to the normal processing technique. (No rusting). We add the appropriate tap oil to get a better quality female thread and heavy duty tap
[M12 x 1.75]
[M18 x 2.5]
[M12 x 1.5]
[M16 x 1.5]
[M16 x 2]
[M20 x 2.5]
Description
Threading Tap & Dice Meet your thread repair needs
Tips for Use of Taps
The speed is controlled according to the hardness of the material. Feed Speed: Normal Steel (copper aluminum alloy): 6-15m/min; Hard Steel: 5-10m/min; Stainless Steel: 2-7m/min; Cast Iron: 8-10m/min; Hardness Higher, Slower High speed and low torque Low speed and high torque When tapping plastic, add lubricating coolant For steel, motor oil is typically used and vegetable oil is used in high demands. For motor oil, please use No.30 for stainless steel.
Wide Application
Suitable for threading through and shallow holes. Create new female threads such as stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, hard plastic, and rescrew damaged female screws.
Universal Square End Shank
Tapping depth should not exceed 1.5 times of diameter (e.g. diameter = 6 mm (M6), tapping depth = 9 mm)
Drill holes with a twist drill before tapping The tapping angle must be stable at a vertical 90 degree.
The high speed tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. It is suitable for a wide range of applications as it uses only base substrates without additional coatings.
Machine taps are used in tapping machines, upright drilling machines, and milling machines.
The M1 to M3.5 micro-taps work primarily on watches and soft metals with low hardness.
Adding the appropriate tapping oil will give you a higher quality female screw and a more durable tap