Material: TPU

Using steps:

1. Clean your cluster screen with a microfiber cloth to remove dirt and dust.
2. Remove the liner labeled with Step 1. (Make sure the film does not have a clear liner)
3. Spray plenty of water on the adhesive surface with the liner fully removed.
4. Light up the screen protector with a button or edge and gently place it on the cluster.
5. Remove the liner labeled with Step 2.
6. Remove excess air pockets and water and complete the process.
Installation is complete

Notice:

-Please make sure it matches your model.
S1000XR Motorcycle Cluster Scratch Protective Film Dashboard Screen Protector for S1000RR

▶Description:

Quantity: 2 sets per package

Material: TPU

▶Package Includes:

Set of 2 (Cleaning Kit with Squeegee)

▶Installation Method:

1. Use the fiber cloth in the package (clean wet cloth) to remove dust and dirt from the speedometer screen.

2. Spray the right amount of water on the speedometer screen (best to use detergent and water mixture water to make sure the position of the protective film is properly adjusted).

3. Peel off the No.1 surface film of the protective film, then carefully paste the protective film onto the bike speedometer screen. After adjusting the position of the protective film, use a hard card (small) to squeeze out excess water and air. White card in package)

4. After squeezing out excess water and air, wipe the moisture on the end of the speed meter, finally peel off the second surface film of the protective film and finish installation.

(There may be a normal phenomenon for some bubbles due to personal craft problems. )