[X 10pc saw blades]
[X 8pc carving knife]
[X SET A]
[X No Power]
[X Set B]
[X SET C]
Parameter:
Material: Aluminum alloy and acrylic
Power: 100W
Voltage: DC24V
Size: 310*60*70mm
Maximum Rotation Diameter: 70mm
Max Clamp Length: 180mm
Chuck Clamp Range: 0.02-0.24 inches (0.6-6
Power adapter:
Input: AC 110 V - 240 V - 50 / 60 Hz Maximum 1.5 A
Output: 12/15/16/18/19V 4.5A max; 20/24V 4A max.
Wire length: 4.3 ft + 4.3 ft (1.1 m)
Function: Engraving, Cutting, Polishing, Lathing, Drilling
PREVENTION:
1. If the user does not have basic experience of lathing, please follow slow, slowly, careful and other safe operations.
2. Drill chuck axis, wood axis, and center axis of the drill must be in a straight line. Or you need to adjust the nuts.
3. If not a cylinder, you need to lower the speed.
4. Push Bearings Without Locktite
5. When using the knife, you need to lock the bottom of the screw, the position should be 1-1.5cm away from the wood.
Package Includes:
1x Buddha Bead Lathe
1x Power Adapter
2x Wood Carving Set
3x Hex Shank (0.06, 0.08, 0.1 inch (1.5, 2, 2.5 mm)