Specifications:
Item Type: Electric Diaphragm Pump
Mode: HV 30B
Material:
Pump Head: Nylon
Shell: Polypropylene.
Diaphragm: TPU.
Check Valve: Fluorine rubber
Check valve spring: stainless steel 316
Motor rotational axis: Stainless steel 316.
Voltage: DC 24V
Rated Power: 350 W
Rated Flow Rate: 7.8 gal (30 L)
Rated Lifting Height: Approximately 316 11 Meters / 36.1 Feet
Maximum Operating Pressure: 70 PSI
Medium temperature: below 140°F (60°C).
Motor Type: AC motor, permanent magnet motor
The characteristics of the pressure switch pump automatically start and stop the pump based on the opening and closing of the outlet.
For example, when the exit is closed, the pressure switch will automatically stop the pump motor when the pressure is reached. If the pressure decreases when the outlet is open, the pressure switch will automatically start the pump motor
The pump is equipped with thermal protection: the main circuit operation is considered as a "continuous operation" application. When the maximum continuous working cycle is reached, the motor must be kept in a low temperature environment before it reaches its maximum heat limit. If you leave the pump running for a long time at the maximum heat limit or near it, the pump will not work immediately.
How to use:
1. When the pump starts to work, you need to open the exit pipe and discharge trapped air to avoid the possibility of air clogging.