Specifications:
Item Type: Diaphragm Pump
Voltage: 12V
Rated Current: 7.6A
Maximum Flow Rate: 6.1 gal/min (20.8 L/min)
Power: 91.2 W
Suction Head: Approx. 3 Meters / 9.8 Feet
Head: approx. 40 Meters / 131 Feet
Stop Pressure: 70 psi / 3.8 kg
Connection Cable: 2 core
Decibel: ≤38db
Features:
Output per minute: 5.5 gallons) GPM
Power Supply: RV Power
Heat Protection: Damage-Free Drying Action
How to use:
1 Connect the water pump to the water inlet and outlet pipe, make sure the water inlet and outlet pipe are securely connected. Otherwise, it will lower pressure, no water suction, leakage or other problems. Tip: The pump head has an arrow indicating the direction of the arrow, the arrow pointing to the water outlet, the other direction is the water inlet. 2. Install the filter on the end of the water inlet The screen must be more than 80 mesh) meaning there are 80 holes in 1 square centimeter) 3.Connect the electric diaphragm pump to the power supply. The output parameters of the connected power must meet the input requirements of the motor. 4. When the power is on, the water pump will start working. 5. Temporarily turn off the connected power switch, connect the water outlet to a water gun, faucet, shower, and other pipeline equipment that requires compression.