[24V 3210YD-24-120FS]
Brand Concept:
BstXqty has always been in the original intention of customer first since its birth. We carefully select the material and process to provide more practical products and more satisfying services. Not only do you give us a review, but also choose us to express the motivation to keep moving forward. Thank you for visiting.
Buy what you want and have the best experience!
Have a good day, friends!
Specifications:
Max power: 120W
Maximum Pressure: 28.6 lbs (13 kg)
Working Pressure: 8G
Opening Flow Rate: 10L/min
Vertical Suction: 4.9 ft (1.5 m)
Lift: 130m
Package List:
1 x Pump
1 x Filter Net
1 * Pump handle
3 x Mounting Screws
1 x Spare Fuse
Operation Guide:
1. Connect the pump to the inlet pipe and outlet pipe. You need to make sure the connection between the inlet and outlet pipe and pump is solid. Otherwise, it will cause pressure reduction and water leakage. (Hint: The pump cover has an arrow that indicates the direction of the water in and out of the water and the direction of the arrow is the way to discharge the water.)
2.Install the filter on the entrance end. It is recommended that the filter density is more than 80 mesh. (i.e. 80 holes per square centimeter)
3.Connect the micro diaphragm pump to the motor. The electrical parameters of the connected power must meet the motor input requirements.
4.When the power is on, the motor pump will start to work.
5. Drain water for 5-10 seconds and deflate the pump and the pipe. When the water is stable, turn off the power temporarily and connect the water gun or pump head.