[24V]
[12v]
How to use:
1. Connect the pump to the inlet pipe and outlet pipe. You need to make sure the inlet pipe and outlet pipe are connected securely to the pump. Otherwise, it will cause low pressure or leakage.) The pump cover has an arrow indicating the direction of the water in and out of the water and the direction of the arrow) is the direction of the water.)
2. Install the filter on the water inlet. The density of the filter should be 80 grit) that means 80 small holes per square centimeter.
3. Connect the micro diaphragm pump to the motor, the electrical parameters of the connected power must meet the motor input requirements
4.When the power is on, the motor pump will start working
5. Discharge water: Leave it for 5 to 10 seconds, remove the air in the pump or pipe, wait for the water to stabilize and turn off the power once and connect a water gun, pump head, etc.
6. Turn on the power. Work
Specifications:
Item Type: Micro Diaphragm Pump
Material: Engineering Plastic
Type: Self-suction return
Package List:
1 x Micro Diaphragm Pump