Features:
The car chassis is made of aluminum plate, using 4 DC geared motor-370 metal motors (with hole speed encoder), and the wheels are 4 97mm mecanum wheels (wheel hub is plastic material, tire is rubber material). The metal chassis is equipped with 4 additional hydraulic shock absorbers. The suspension is freely adjustable in both soft and hard. The chassis has many mounting holes for easy expansion and installation of other modules.
Specifications:
Material: Aluminum alloy
Weight: 1350g
Load: 4,000g
Ground height: 1.4 inches (36 mm)
Operating Voltage: 6-12V
Rated Current: 600mA x 4
Motor Output: 2.5W x 4
Gearbox Ratio: 1:34
Motor Speed: 294rpm
Reference Speed: 1.5m/s@12V
Encoder Voltage: 3.3-5V
Encoder Type: Hole
Encoder accuracy: 12 cpr
Attenuation stroke: 0.6 inches (15 mm)
Motor Wiring Instructions:
Red: Motor Plus
Black: Motor Negative
Green: Encoder Negative
Blue: Encoder True
Yellow: Output Phase A
White: Output B phase
Features:
370 metal motor with hole speed encoder allows for closed-loop control
Four thick hydraulic metal shock absorbers increase friction on four wheels.
All metal chassis has a wide variety of mounting holes and can be drilled by yourself.
Package List:
1 x Bottom Metal Chassis
1 x Motor Bracket
4 x U-shaped brackets
2 x U-shaped shock absorbing brackets.
Shock absorber x 2
4 x GA25 motors.
4 x Mecanum Wheels 3.8 inches (97 mm)
4 x Couplings
4 x Flange Bearings
1 x Switch.
5 x M2.5 x 14mm screws
5 x M2.5 x 16 mm screws
M3 x 5mm Countersunk Screws, 9 Pieces
20 x M3 x 10mm Screws
10 x M25 Nuts
18 x M3 Nuts
2 x 22AWG wire 7.9 inches (20 cm)
6 x Cable Ties
Note:
Wheel hub is made of ABS plastic.
Product is not assembled.