Feature

●Main Features: SA6 is a spectrum analyzer, a signal designed to display the signal spectrum within a frequency of 35 to 6200 MHz. The analyzer identifies the amplitude and frequency of components of the analyzed process
●MULTI-FUNCTIONAL: The spectrum analyzer can handle signals from all the widely used technology, such as Wi Fi, 2G, 36, 4G, LTE, CDMA, DCS, GSM, GPRS, etc
●Additional Features: Enables you to measure the frequency response of passive or devices (such as filters, amplifiers). This software allows you to measure SWR and reflective dampening modules. This requires an external directional coupler and a series of calibration methods
●Mainly used in field operations: This device is sturdy, durable, lightweight and low energy consumption. Enable service centers and maintenance shops to perform analysis on the field for debugging and repair work. In addition, the Spectrum Analyzer is the solution for maintenance workshops and enthusiasts
●Perform the following operations: Place external devices at the base station, quickly analyze the RF environment, ensure the cells are working properly, and repair and adjust relays, generators, filters, etc. If you use an external directional coupler (without use) measure the SWR


Description

Specifications:
Material: Alloy
:SA6
Performance Parameters:
3.2" Color Resistance Screen
Wide frequency: 35 - 6200 MHz
Frequency scanning: points per 500 points
High measurement accuracy: 2dB within 70~75dB
Compatible with based computers
Specifications:
Display frequency: 35~6200 MHz
Measuring frequency: 35 ~ 4500 MHz
35 ~ 3000 MHz: 75 dB
3000 ~ 4500 MHz: 70 dB
Max span: 6165 MHz
Bandwidth: 200 kHz, fixed
/>Scanning frequencies over 100MHz: 700MHz/s
100MHz scan: less than 0.25 seconds
Background noise up to 3000MHz: less than -100dBm
Background Noise 3000 - 4500MHz: Less than 95dBm
Background Noise 4500-6200 MHz: Less than 90dBm
Impedance: 50 Ohm
Constant ratio within operating frequency: less than 1.5
Internal Attenuator: 0-30 dB<10 dB Attenuation Error: 2 dB
10 to 20 dB attenuation error: 5 dB
20 to 30 dB attenuation error: 8 dB
Tracking Output: -15 ~ - 25 dBm
within accuracy