Feature

●Thickness = 6mm x Length = 30mm
●Thread part = Coarse [Pitch: Approx. 0.04 inch (1.0 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items
●Note: If full and half screws are important, please contact us

[M5×16]

Description

■ Head shape: Button (pin/hex hole)
Rounded wide button head with tamper-proof tool holes
Since the pin is standing in the middle of the hex hole, it is not possible to wear a regular hex wrench.
For tightening, use a wrench for hex holes with pins, so you can apply strong torque to tighten.

■ Thread Shape: Coarse
It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.

■Material: Stainless steel
Most representative stainless steel (equivalent to SUS304)
The strength is almost equal to "iron".
Excellent corrosion resistance and good mechanical properties.
Although it is normally not magnetic, it can harden due to cold processing, and it may cause magnetism.

■Surface treatment: Brown bronze (GB6)
Stainless steel turns brown with heat. Color intensity varies depending on heat temperature and time applied The intensity of the color is indicated by the number of symbols, the larger the color becomes dark. GB6 is common. Also available in sizes 4 and 3 and thinner bronze colors.
Color is "Bronze Color".