Feature(may vary by option.)
●Please note: This is a hammer and stand set for the grommet ring sold in our store. If you have other manufacturers grommets, you may not be able to use the same dimensions
●★Quantity: ★ Quantity: 1 hammer rod and 1 knitting stand
●★ Compatible Sizes: Hole diameter 0.1 inch (3 mm) (for eyelets in listing); Material: Iron (with plating)
●When installing with a hand hammered tool, it will give you a little light power at first. Apply the strength of the hitting rod vertically. You will need to practice based on your strength until you get used to successfully. Only use the eyelet hammer and hammer stand available in the shop
●Craft tool grommet punch set allows you to apply pressure vertically You can also use the eyelets (hole diameter) of the same inner diameter (hole diameter) sold separately
[Hole diameter For 8mm]
[Hole diameter For 10mm]
[Hole diameter For 12mm]
[Hole diameter For 3mm]
[Hole diameter For 4mm]
[Hole diameter For 5mm]
[Hole diameter For 6mm]
Description
Thank you for viewing
Craft Tools and Eyelet Hammering Set
Quantity: 1 hitting rod and 1 knitting stand.
Material: Iron
When installing with hand hammered tools.
At first, it has a little light force
Push the bar vertically as possible
You will need practice by your strength until you get used to the right way.
Only use the eyelet hammer and hammer stand available in the shop.
Not for use with Brass Grommets
Use the eyelet (hole diameter) of the same inner diameter (hole diameter) to remove eyelets (hole diameter).
This product is individually inspected, but due to the nature of the hammering, there may be slight scratches or stains.