Feature
●2.5 layer rainwear lining; exclusive seam tape Used to repair seams and pinholes and prevent water from entering Special High Thickness 0.007 inch (0.18 mm) Width 0.9 inch (22 mm) x Length 66.6 ft (20 m) Transparent, Approx. 3.6 oz (10May be used with PU or PVC coated tent fabric or 2-layer fabric, but we recommend using 2.5 layer fabric or TPU laminate fabric because it cannot be used with some PU or PVC coated fabrics (may not adhere due to coating components). Not suitable for tent repairs
●Made of thermoplastic polyurethane + polyurethane, iron and dry iron, apply a press cloth and use a low medium temperature (approximately 10-20 seconds). After thermal pressing, the adhesive will be stronger when cooling. Cannot be crimped on the surface of the rainwear treated with water repellent agents such as silicone
●Basically, seam tape is a thick fabric and thin fabric uses a thin tape. Please choose the normal 0.11mm thickness type or 0.18mm thickness according to your application. Iron directly may cause the fabric to melt due to heat. (You can substitute a handkerchief in your home etc. )
●If you cut the corners of the tape, it will not peel off. The seam tape itself has a slight level of waterproofing but it is mainly used for waterproofing and preventing water from entering
●Note: Do not treat with PE (Polyethylene) cloth. Heat may cause fabric to melt (Blue Sheet, etc.) *You can refer to the usage video in the product name store page
[Black Width 18mm x Length 20m | Thickness 0.11mm]
[transparent width 18mm x length 20m | thickness 0.11mm]
[white width 18mm x length 20m | thickness 0.11mm]
[white polka dot width 18mm x length 20m | thickness 0.11mm]
Description
Product description
How to Use: 1. Clean the surface of the treated area and dry thoroughly. 2. Spread the fabric over the ironing board and place the tape over the seams and fabric seams. 3. Place a thin cloth such as a handkerchief over the seam tape and press the iron to keep the tape in place. Iron temperature: Synthetic fiber: Low temperature (approximate): 284°F (120°C); Cotton: Low temperature (approximate): 350°F (160°C); If seam tape is poorly applied, please raise the temperature by little. 4. Repeat the work while making sure the seam tape is attached, and finally cut the tape. Note: Do not iron directly on fabric or seam tape. The fabric may burn or melt seam tape. Note: Do not treat with PE (Polyethylene) cloth. Heat may cause fabric to melt (such as blue sheet)
Safety Warning
Ironing directly on the processed fabric may cause the fabric to melt. Please unplug the iron from the outlet for safety when you leave the work area or when youre finished. Do not apply to PE (Polyethylene) cloth. Heat may cause fabric to melt (such as blue sheet)