Feature(may vary by option.)

●✔ Oil Canister Heater Belt is used for heating, tracing, and heat retention of keg type equipment such as tanks and pipelines. Wrap directly around a heated room for easy installation and removal
●✔ This heater is controlled by an adjustable push-button thermostat. Temperature setting range is 30 to 150 degrees Celsius. For plastic drums, we recommend setting the thermostat less than 37°C (100°F)
●✔ HEATING EFFECT: This heater has a good heating effect, and the internal heating element is made of nickel-chrome alloy wire, which makes the flat plate ultra thin, fast heat generation, high thermal efficiency, and long service life
●✔ The insulation layer is made of silicone rubber and fiberglass cloth, which provides high insulation performance and 20-50KV/MM isolation breaking voltage for safe use
●✔ Use flexible springs to secure the silicone heater around drums of various diameters. It is convenient, energy-saving and safe. Spring extends to approximately 3 inches. Fits most 53 gallon drums

[200L  & 250*1740mm  & 2KW]





Description

Specifications | Voltage | Power | Applicable | Temperature Management Method | Weight
| 49.2 x 68.1 inches (125 x 1740 cm) | 220 V | 1000 W | 200 L | Temperature Control Button | Approx. 2.2 lbs (1 kg)
| | 250 * 1740 | 220V | 2000W | 200L | Temperature Control Button | Approximately 3.5 lbs (1.6 kg)
| 250 * 1740 | 220V | 3000W | 200L | Temperature Control Button | Approximately 3.5 lbs (1.6 kg)

Product parameters:
Insulation: Maximum temperature 120°C (250°F)
Operating Temperature: 30~150℃(80~300℉)
Product Insulation: 300 M
Compression strength: 1500 V/5S
Withstanding Voltage: > 5KV

Package Contents:
1 * Silicone Heater (Drum not included)

Note:
Please do not pull the power cord too hard.
♦ Do not use in environments where fire or explosion hazard.
■ Do not install in places with water droplets. Do not use thermostat and heater separately.
◆This product does not have a forced shutdown function. When not in use, please unplug the power cord from the power supply.
♦ Do not soak the product in liquid. This product is intended for indoor use. In a dry environment, there is static electricity but no problem for operation.