This product is a simple 7.1 inch (18 cm) square nozzle designed for the introduction to the creation of the end bag.

Sew on tips but can be inserted into the product.

Includes 1 piece of original backing paper

This is a set of 10, so try making a variety of bags.

Base adjustment

If the tip is too firm or too loose, please bend the nozzle joint or base of the twist slightly with pliers to adjust the tightness of the batch.Also, place the base on a flat surface and adjust it by hand if there is any distortion.

Fabric Sewing

Cut and sewn the fabric according to the included pattern.The pattern on the pattern is a basic example so you can arrange it to create a bag of various shapes.

Sewn on base

Temporarily hold the middle and left of the base and then sew.

Sewing methods include "flag" and "cross".The trick is to cross the thread at a 45° angle with the base.This helps to avoid the needle tip hitting the back of the nozzle.

If you want the thread to be inconspicuous, it will be sewn in a straight line, but the length of the front and back is the same as the cross section diagram, so the needle tip will interfere with the back of the nozzle, making it difficult to see.

This nozzle can also be used as a plug.

Saying

Please note that this nozzle is a popular product for hobbyists and please understand the following tips.

Sewing holes may be cut at the end of the nozzle.

The material of the base is soft.Material is iron.

There may be some scratches or distortion.

There is no practical difference, but please pay attention to the above when the writer uses it in the production of the product.