(Instructions for use):
To use, cut the edge of the fabric into the triangle. Insert the large end of the belt maker, and pull it out from the smaller side.
After unraveling, trim a little bit and iron to flatten it.
Other model numbers are same
(Bean Knowledge).
6mm wide. We prepare a 0.5 inch (12 mm) wide bevel cut sheet. Artwork edge is 3mm (bifold end)
12mm is the width of the finished product on the side of the bag. Prepare a 24mm wide diagonal cut. Edge is 6mm (edge is folded)
18mm is the width of the finished product on the side of the bag. Prepare a 36mm wide diagonal cut. Edge is 9mm (edge is folded)
Width is 25mm. Prepare a 1.8 inch (46 mm) wide cloth cut at an angle. Artwork edge is 11.5mm (bifold end)
For your reference, we provide friendship tips.
0.2 inch (6 mm) (narrow sides) Patchwork of the glass colored picture on the narrow border of the trim is often used by the model number;
0.5 inch (12 mm) (narrow sides): Thin belt, decorate most commonly used types;
18mm (regular type): wraps around the regular width of the side bar;
25mm (wide type): Thick work / Wide wrap with normal width;