Presenting sewing machines that make it easy to start the edge of clothes such as aprons and ruffles. With one compact sewing machine attachment, you can easily clean the fabric edges.
Product Specifications:
Color: Silver
Material: Stainless steel.
Quantity: 3 pieces.
4/8"=13MM*1
6/8"=19MM*1
8/8"=25MM*1
【Package included】:
3 x Sewing Machine Holder.
3-roll holding that is perfect for the beginning of fabric ends.
This sewing machine holds a variety of bias tape as a dedicated hold for bias taping. Feel free to sew your favorite bias tape!
Easy to use and easy to sew:
This sewing machine attachment can be easily sewn around the edge of bias tapes and more. Perfect for DIY or other handmade edging!!!
(Compatible with mainstream horizontal kettle models)
Not only can it be used with current general household sewing machines, but also older style sewing machines. Please note that it cannot be used with compact electric sewing machines.
[Instructions for use]
Objects are thinner (if the fabric overlaps and becomes thicker, it will not fit into the pressure).
1. Fold the edge of the cloth 2.4 inches (6 cm) in a width of about 0.25 to fold twice
2. The overlap of the triple rolled seams is cut off and folded together to reduce the thickness.
3. Put the cloth into the groove (hole). When started, the fabric will naturally roll up by the action of three rolls, but we do hand sewing the fabric left and right to ensure a consistent amount of load.
[How to install the pressure]
1. Press the button on the back of the holder and remove the pressure.
2. Adjust the holder groove on the pin part of the replacement press and slowly lower the lever.
3. Make sure you have pressed up once and check if it has been holding up.
[How to install the pressure]
Replacement type
1. Put the needle up and hold it up. Press the button on the back of the holder to release the press.
2. Adjust the holder groove on the pin part of the replacement press and slowly lower the lever.
3. Make sure you have pressed up once and check if it has been holding up.
Removable and replaceable retainer holder.
1. Remove the press before removing the holder.
2. Use a screwdriver or coin to turn the screw on the side of the holder over the side to loosen it.
3. Lift the hold up further and insert the replacement pressure, and the screws are loose.
4. Rotate the screws to the front while holding it firmly with your finger.
[Precautions]
If you have any questions about the customer, please feel free to contact our staff by email. We will respond quickly and carefully.
Objects are thinner (if the fabric overlaps and becomes thicker, it will not fit into the pressure).
You need to hand adjust the cloth to the left and right to ensure a consistent amount of load.
Please note that it cannot be compatible with compact electric sewing machines.