Sewing machine press makes sewing tape easy Sew various bias tapes with one compact sewing machine attachment!
Product Specifications:
Color: Silver
Material: Stainless steel.
Quantity: 1
【Package included】:
1 x Sewing Machine
Dedicated tool for bias taping
This sewing machine holds a variety of bias tape as a dedicated hold for bias taping. Feel free to sew your favorite bias tape!
Easy to use and easy to sew:
This sewing machine attachment can easily be sewn on binding tape such as bias tape. Perfect for DIY or other handmade tape installation!!!
(Compatible with mainstream horizontal kettle models)
This sewing machine uses a horizontal kettle for todays general household sewing machine, so you can use it all with one sewing machine. Please note that it cannot be used with compact electric sewing machines and vertical kettles.
[Instructions for use]
Objects are thinner (if the fabric overlaps and becomes thicker, it will not fit into the pressure).
1. Prepare a bias tape. When completed, please insert the bias tape width of 0.6 inch (15 mm) or less. Can be folded in four ways.
2. Place in the oval groove (hole) located on the right side of the binder. (It is a little difficult to put in, but it is better to insert it from the largest hole in front of the bag and send it with a punch, etc. To use unbroken fabric (width 1.0 inches (2.5 cm)), set it in the U-shaped groove in the front
3. Set the holding position.
4. Adjust the position of the needle to the edge of the bias tape.
[How to install the pressure]
Replacement type
1. Put the needle up and hold it up. Press the button on the back of the holder to release the press.
2. Adjust the holder groove on the pin part of the replacement press and slowly lower the lever.
3. Make sure you have pressed up once and check if it has been holding up.
Removable and replaceable retainer holder.
1. Remove the press before removing the holder.
2. Use a screwdriver or coin to turn the screw on the side of the holder over the side to loosen it.
3. Lift the hold up further and insert the replacement pressure, and the screws are loose.
4. Rotate the screws to the front while holding it firmly with your finger.
[Precautions]
If you have any questions about the customer, please feel free to contact our staff by email. We will respond quickly and carefully.
You can easily attach bias tape that measures less than 0.3 inches (7 mm) wide. Please use commercially available bias tape (finished dimensions of 0.3 inches (7 mm) or smaller than 1.0 inch (2.5 cm).
Objects are thinner (if the fabric overlaps and becomes thicker, it will not fit into the pressure).
When using regular cloth, please use a cloth cut to 0.9 inch (24 mm) wide.
Please note that it cannot be used with compact electric sewing machines and vertical kettles.