[18mm width half white]
[Width 30mm Flat white]
[Width 30mm Half black]
[Width 18mm Bias black]
[Width 300mm Flat black]
[Width 18mm Bias white]
[Width 20mm Flat white]
[18mm width half black]
[Width 18mm Flat black]
[Width 25mm Flat white]
[Width 30mm Bias black]
[20mm width half white]
[Width 300mm Flat white]
[Width 6mm Bias black]
[Width 20mm Bias white]
[25mm width half white]
[20mm width half black]
[Width 30mm Bias white]
[Width 25mm Bias white]
[Width 25mm Bias black]
[Width 30mm Flat black]
[Width 18mm Flat white]
[Width 6mm Flat black]
[Width 6mm Bias white]
[Width 20mm Bias black]
[Width 30mm Half white]
[25mm width half black]
The adhesive core is taped and used to prevent stretching.
Use it to prevent stretching of shoulder seams, cuffs, armholes, etc., and to remove the openings of pockets and button holes.
Bias type is used for areas where a little stretch is required.
The finish is soft after gluing, so the texture of the fabric will not be ruined.
You can wash it everyday, but also dry clean.
Pre-shrunk so it will hardly shrink after washing.
Adhesive Method:
If the iron temperature is between 284°F and 350°F (140°C to 160°C), the adhesive will be removed and adhered to the surface.
It will adhere completely when you iron it and heat it up.
If accidentally glued on it, you can iron it again and remove it from the top and remove it from the heat.
Note:
Please test the adhesive on the fabric you use before using.
When checking for adhesion, please allow it to be completely cooled before using.
If you have been treated with special treatment on the surface of the fabric, it may not be able to
Item Number:
Specifications: Anti-stretch tape
Color/Pattern: Black
Size: Width 0.8 inches (20 mm) x 82.8 ft (
Material: 65% polyester, 35% cotton.
Adhesive Temperature: 284°F to 354°F (140°C to 160°C).
Crimping time: 7 - 10 seconds
(From )