[red]

[Silver]

[blue]

[yellow]

[Black]

Product description

A set of front forks for HONDA motorcycles, Live Dio, etc.

Applicable car models:
Fits 27mm front disc models
DIO (AF18)
Live Dio (AF34/AF35/ZX)
Super Dio (AF28)
Smart Dio (AF63/Z4).
✅ ZOOMER
etc.

Set Contents:
Front fork, left and right set.

Product Specifications:
Fork Diameter: 1.1 inches (27 mm)
Total length: 14.6 inches (370 mm)
Axle Shaft Hole Diameter: 0.4 inches (10 mm)
Caliper Hole Diameter: 5.1 inches (130 mm)
Caliper mounting pitch: 3.3 inches (85 mm) (hole center to hole center)

Product Description:
A set of front forks for motorcycles such as Honda Live Dio ZX, etc.

If the front fork is a 27 pie vehicle, it can be installed on a variety of automatic motorcycles except for the examples of the vehicle model!

Recommended for those who want to replace normal forks that have lost or bent or rusted over time, and want to improve suspension performance.

Metallic color forks match the everlasting classic ZX look!
Just install it and it will change the atmosphere. Not only is it practical, but it also has a huge impact on the appearance.

This is a low down short-type type, so it is about 2.4 inches (6 cm) shorter than normal, and is recommended for a low-down finish.

✅ Disc brakes only but can be installed with caliper support for ZX.
(If you install it outside of the ZX, you will need another 10x16x15 spacer)

A product that is very cost-effective than genuine products. How about using it for a variety of purposes, such as repairing, repair, customing, etc.

Legal Disclaimer

[Caution] *Instruction manual not included. If you install it on the normal foil (drum brake) for Honda, you may be able to install it by purchasing a front fork adapter (fastener) for different purposes. If it comes into contact with the inner, some processing will be necessary.
You may need to modify the viscosity of the oil or increase the spring rate.

If the tire is hitting the inside of the fender, you may want to try putting the front fork downward.

Because the bolts to stop the caliper are short, 2 extra long screws such as M6 are required.

Please be aware that if you lower the back, it will interfere with the front cowl.

※ Compatible models are for reference only.
Depending on the year and model, the model may require modification to be required for installation, so please check your vehicle before purchasing.

This product is imported and may have small scratches or scuffs.