Feature

●Adjustment Range: The fork shield driver is adjustable, and the adjustment range is 1.54 in (39 mm) - 2.0 in (50 mm) / 1.54 in (1.97 in), making it suitable for most forks, and is flexible and easy to use
●【Durable Material】The fork oil seal bushing driver tool is made of high quality carbon steel, high strength, resistance to oxidation and rust, with high quality characteristics such as excellent abrasion resistance, long service life
●【Professional Tool】This fork shield driver tool is used to install/replace most fork seals Easy to install the seat ring without damaging the seal of the axle housing. An indispensable tool for motorcycle repairs
●[Range of Application] Fork shield drive is suitable for most traditional or handstand forks. Replacement for Suzuki etc
●[Split Design] The fork shield driver uses a split design to prevent the new fork seal from being damaged during installation. Sturdy body pumps the seal evenly into the fork tube


Description

Specifications:
Item Type: Fork Shield Driver Tool
Material: Carbon Steel
Adjustment range: 39-50mm/1.54-1.97inch
Accessories:
Replacement for Suzuki
Replacement for Kawasaki

How to use:
1. After disassembling the front fork, slide the old seal down. 2.Check the pillar for defective. 3. Apply fork oil to the inner surface of the new seal. 4. Slide the seal onto the column and slide it over the slider. 5. Loosen the three cross screws, increase and decrease the diameter of the tool to adjust the plastic part to the size of the seal. 6. Push the adapter into the seal, slide the drive tool up and down several times until the seal is pushed into the slider.

Package List:
1 x Fork Shield Driver (2 parts)
/>1 x Clip