Feature

●KWX-2 8.8 oz (250 g)
●Iron setting temperature: 145°F (65°C) ~ KWX-1, KWX-2, KWX-3 is a set of 3 waxes. The KWX-1 is specialized for penetration, the KWX-3 specialized for gliding and the KWX-2 connection. Each wax is different in density. Therefore, if there is a significant difference in density, it separates itself like water and oil, and it will not bond well and peel off easily, and even if you make base-makeup, the base effect will disappear
●The KWX-1 is "soft = low density". The KWX-3 is "Hard = Density". Although it is "low and high" in contrast, this difference is large and the effect will vary greatly depending on the temperature of the worker (KWX-3 is painted later) and the results may vary depending on the level of the worker. So the KWX-2 becomes a denser close to the KWX-1 when melted with an iron and closer to the density of the KWX-3 when it is hardened at room temperature (around 20 degrees Celsius), allowing the three pieces to be interactive, ideal
●The wax deposits are released when the wax is removed, but all waxes of cashwax are safe without gas, etc. even when burned. Dispose of "burning waste", no problem. Same as candles. It can also be biodegraded naturally by bacteria. While the wax may melt out depending on the temperature and temperature during transportation, please reharden it in a refrigerator or a cold dark place


Description

KWX-2 Iron Setting Temperature: 144°F (65°C) ~ KWX-1, KWX-2, KWX-3 is a set of 3 waxes. The KWX-1 is specialized for penetration, the KWX-3 specialized for gliding and the KWX-2 connection. Each wax is different in density. Therefore, if there is a significant difference in density, it separates itself like water and oil, and it will not bond well and peel off easily, and even if you make base-makeup, the base effect will disappear. The KWX-1 is "soft = low density". The KWX-3 is "Hard = Density". Although it is "low and high" in contrast, this difference is large and the effect will vary greatly depending on the temperature of the worker (KWX-3 is painted later) and the results may vary depending on the level of the worker. So the KWX-2 becomes a denser close to the KWX-1 when melted with an iron and closer to the density of the KWX-3 when it is hardened at room temperature (around 20 degrees Celsius), allowing the three pieces to be interactive, ideal. The wax deposits are released when the wax is removed, but all waxes of cashwax are safe without gas, etc. even when burned. Dispose of "burning waste", no problem. Same as candles. It can also be biodegraded naturally by bacteria. While the wax may melt out depending on the temperature and temperature during transportation, please recure it in a refrigerator, a cool, dark place, etc.