Servo Motor, Aluminum Alloy Robot Servo Motor High Torque 380kg 24V, Compatible with Remote System, Futaba, JR, Hi-Tech, Robot, Robot Arm
Features:
1. Metal gears promote high power motor high torsion output, sturdy and long lasting
2. Robot servo is stable and can be controlled steadily to operate within a safe torsion range. Steering gear can continue to work even if the fuse runs out.
3. Servo is fully compatible with remote system such as Futaba, JR, Hi-Tec, etc.
4. Robotic servo can be widely used in robots, robot arms, production lines, camera puncht control robots.
5. The D-hole non-slip key connection of the servo arm plate is compatible with ASMC ASME servo axles, so it is very easy to install
Specifications:
Item Type: Robot Servo Motor
Material: Aluminum alloy
Model: ASME-04B
Maximum twist: 380kg.cm (24V) (actual measurements, not theoretically calculated value)
3648N.cm (24V) (actual measurements, not theoretically calculated value)
190 kg.cm (12 V) (Actual measurement and not theoretical calculation).
1824N.cm (12V) (actual measurements, not theoretically calculated value)
Angle Speed: 0.5s / 60° (0.5s required for 60° rotation), 24V;
1.0s / 60° (1.0s required for 60° rotation), 12V;
Rotation angle: Up to 300°
Input mode: Pulse signal (remote control, multi-channel steering gear controller, single chip microcomputer) or analog voltage signal (potentiometer)
Pulse signal input range: 0.5ms-2.5ms suitable for all "multi-channel steering gear controller", "1ms-2ms model airplane remote controller", "MCU programming", etc.
Voltage signal input range: 0V ~ + 5V
Control accuracy: 0.32°
Rated Voltage: 12 V - 24 V / DC (11 V / Min. - 30 V / Max, Voltage Limited)
No-load current: 500mA (Current Limit: 5A, Switching power or battery exceeding 5A is recommended)
Limit Angle: ±150° or 0° to 300° (Max.) The steering gear has electronic limits adjustment.
Analog voltage mode: 0 V - 5 V input voltage (0.22 V supports 0 °, 4.78 V supports 300 °).
Material: Gear and Shaft: Alloy Steel; Gear Box: Cast Aluminum
Weight: approx. 550g / 19.4oz
Measures approx. 95 x 60 x 110mm / 3.7 x 2.3 x 4.3in
Mechanical Life: > 1,0000 cycles / Full Load (low profile)
Restriction Parameters
Limit voltage: 11V-30V / DC (max)
Current Limit Value: 5A ± 0.2A (max)
Working angle: ±150° or 0° to 300° (Max.)
RC mode: 1 ms Pulse mode: 1 ms - 2 ms (pulse width) / 50 Hz - 333 Hz (frequency)
2 ms Pulse Mode: 0.5 - 2.5 ms (pulse width) / 50 Hz - 33 Hz (frequency)
Analog voltage mode: 0 V - 5 V input voltage 0.22 V supports 0 °, 4.78 V supports 300 °)
Package List:
1 x Robot Arm Servo.
1 x Connecting Wire
Note:
1. Please do not overload the use.
2. Do not use overpressure.
3. Do not use overcurrent.