Feature

●Allows you to connect any record player without a phono equalizer to a recording system, etc
●Works with both MC (Moving Coil) and MM(Moving Magnet) cartridges
●Adopts low-noise amplifier circuit, no noise or distortion caused by a booster transformer. It also cuts out excess subsonic ingredients with a low cut filter
●Genuine Imported
●This product is an imported product, so there may be cases of crushed boxes, but this is not a problem. No returns or exchanges due to crashed boxes


Description

With this unit, you can connect a record player without a phono equalizer to a recording system, etc.
Works with both MC (Moving Coil) and MM(Moving Magnet) cartridges.

Compatible with MC and MM type cartridges:

The input can be switched between MC and MM type and change the gain and cartridge load to match the cartridge.
In addition, the load resistance of the MC type cartridge can be set to 100Ω or 25Ω.
In addition, the GAIN TRIM control allows you to optimize the output for each cartridge.

【Eliminates Excess Noise】

Adopts low-noise amplifier circuit, no noise or distortion caused by a booster transformer.
The low cut filter also allows you to remove excess subsonic ingredients from your record player without compromising sound quality.

Features:

• High performance, low noise phono equalizer amplifier
• Connect a record player to a variety of audio systems
• Compatible with both MC and MM cartridges.
• Low-cut filter eliminates subsonic ingredients
• Adjustable preamp gain
• Equipped with clip indicator

Specifications:

• Input terminal: Gold-plated RCA 47kΩ/100pF (MM) or 25/100Ω (MC) switchable.
• Output terminal: Gold plated RCA, 100Ω
• Maximum input level: 440 mV (1 kHz, MM mode), 44 mV (1 kHz, MC) mode).
• Maximum output level: 6Vrms / +18dBu
• Maximum Gain: 43dB(MM)/63dB(MC)
• Frequency response: 20Hz - 20kHz, ±0.5dB
• Low Cut Filter: 22Hz, 2pole
• THD: <0.0010% (typical)
• E.I.N:346nV, -127dBu
• Chassis: Aluminum, Black Anodized with Rubber Sides
• Power supply: INPUT 100 - 240 V, OUTPUT 12 VDC @ ≥ 800 mA Center Plus (Includes dedicated universal adapter). Note: AC adapter from previous model (Precision Pnoho Pre) is not available. Be sure to check the specifications.
• Dimensions: 47.5H x 117W x 108D mm
• Weight: 0.86 kg
• Note: 0 dBu = 0.775Vrms