Feature

●Low Resistance Oiler : These bicycle hydraulic disc brake oil bleed kit tools are made of high quality raw materials, which have high resistance, high chemical resistance, high destruction and high impact resistance. Long time wear
●Brake Caliper Connection Method: Hose is connected directly, and the air can float from bottom to up, so you need an oiler filled with brake fluid to connect to the brake caliper
●2 types of grease nipples with straight hose: 1. Conventional switch grease nipple - no integrated switch. Typically, the switch on the oil circuit is controlled by the other socket head cap screw. 2. Quick oil release screw: External hexagon type screw with built-in grease nipple
●Hose Buckle: Hose buckle is equipped with 6.0 to 6.5 ports, supporting all "quick disassembly oil screw" structure oil nozzles to prevent hose from slipping off
●APPLICATION: Bicycle hydraulic disc brake fluid bleed tool bleeder kit is used for Sram, Magura, and most other brands oil discs


Description

Description:
This bicycle hydraulic disc brake oil bleed tool kit is easy to use, easy to carry, and includes all the tools you need to maintain your brakes properly. Made of high quality raw materials, it has high resistance to chemicals, high breaking elongation, and high impact resistance. Even when propelling high concentration of suspension oils, it has a considerable smoothness and will not deteriorate for a long time. Use The hose is directly connected and requires a lubricator that meets the brake fluid to connect to the brake caliper to help air float from the bottom. The hose buckle has a port of 6.0 to 6.5, and supports all "quick disassembly oil screw" structure oil nozzles to prevent the hose from slipping off. Suitable for all series of oil discs from SRAM, MAGURA, and most other brands.

Specifications:
Product Name: Oil Dish Oil Fill Tool
Weight: Approx. 8.5 oz (246 g) / box.
Material: Nylon
Application: All series of SRAM, MAGURA, s, and most other oil pans.
Plastic Box Size: Approx. 7.5 x 3.5 x 2.4 inches (19 x 9 x 6 cm).
Note: One bottle of oil for brake is more important than empty the oil circuit. It is recommended to use a bottle of oil for one brake (60ml) Each brake capacity is about 20ml, but the brake needs at least 1-2 times. How to clean the oil circuit

Product List:
2 x Oil injectors
Rubber bands x 2
3.9 inch (10 cm) hose x 2
2 x Anti-Reverse Clips
1 x M5 Pagoda Connector
1 x M6 pagoda connector
Funnel x 1
1 x M5 Long Connector
2 x M4 pagoda connectors
3 x M6 short connectors
1 x Magar MT Connector
1 x Sra * Guide / LEVEL Connector
Funnel blocks x1
1 x 4 piston stop
1 x 2 Piston Stops
Road Car Block 1
1 x Hose Buckle
7-8mm Wrench x 1
1 x T10-15 Wrench
0.08 inch (2 mm) Hex Socket x 1
0.2 inch (5 mm) hex socket x 1
1 x gap adjustment sheet

Note:
1. Due to lighting effects and shooting angles, there may be color differences, please understand.
2. Due to manual measurement, product size may be acceptable.