Feature
●Please choose the radio slave (remote) as needed. If you choose the radio slave (remote control) "TR-Q6", please inform your camera manufacturer (Canon/Nikon/Sony/Fuji) by email info@omnivas.jp
●You will need a compatible radios slave (remote, trigger) or synchronous cable to illuminate your strobe. In addition, if you use the sync cable, a separate hot shoe adapter is required for cameras without a synchronous terminal (refer to our blog site=https://omnivas.jp/2014/08/19/item/studio-flash/dii-200/post-3140). Please note:
●When combined with the DMII-5 and the remote control "TR-Series", some cameras may cause the camera to run out of the camera with the maximum tuning speed (1/200 seconds for the Canon 5D mark III). Use the shutter speed slowly
●It is not compatible with pre-luminescence (including preemission in clip-on strobe TTL mode, etc.)
●Related Product: DMII-5 Strobe Single Piece / DMII-5-UM1S Umbrella Set / DMII-5-SB1S Softbox Set
[No remote control]
[Remote control TR-Q6 included]
[Remote control TR-V6 included]
Description
Product Information:
※If you choose the radio slave (remote control) "TR-Q6", please inform us the remarks section of your camera manufacturer (Canon/Nikon/Sony/Fuji).
This monoblock strobe has the basic features required for studio photography, such as high output of 500 watts of power, 1.4 seconds of recycling time, bright 15 W LED modeling lamp, radio wave (remote control, trigger) and "TR-series" support.
Competitive performance that rivals other products over 100,000 yen at an overwhelming cost performance. Not only is it recommended for photographic shops and photo studios, but it is also recommended for hair salons, apparel related and businesses aiming to build a full shot.
Our company OMNIVAS is an authorized distributor of JINBEI. Please leave our store for domestic support including repair response.
Note:
When the output value of the strobe is lowered, it will automatically illuminate to discharge the electricity charged by the capacitor. Please note:
Example: When the output value is lowered from 7.0 to 5.0, it will glow once at 7.0 output.
When the light slave function is turned on (an eye mark is displayed on the rear monitor), wireless synchronous illumination with the radios slave "TR-Series" will not be possible (output adjustable). Also, if the light slave function is turned on, the wireless settings will be OFF when it is restarted. Please note:
If you turn off the power immediately after changing the settings on the back panel, the settings may not be saved (you will see the settings before the restart) After you change the setting, wait 3-4 seconds before you turn it off.
Product Specifications:
Maximum Output: 500 Ws (GN64 (when using 7.1 inch (18 cm) reflex sold separately))
Recycling Time: Approx. 1.4 seconds (when fully illuminated / under 60 Hz environment).
Dimmer Range: 7f-Stop (9.0-3.0, 0.1 steps)
Actual measured average color temperature: Approx. 5,260 K
Flash Tube Emitting Times: 10,000 times (*1)
Modeling Lamp: 15W LED (1000 lux to @3.3 ft (1 m)
Synchronization method: JINBEI TR (radio-luminescence via radioslave), synchronous cord, photo slave
Sync mode: First curtain and second curtain (only when using TR-Q6).
Channels: 32 channels (0-31)
Group: 16 groups
Display: High brightness LCD
Cooling fan: Built-in
Connection: 0.6 inch (16 mm) female dowel, JINBEI/Bowens compatible mount
Size: Length 10.6 x Width 5.3 x Maximum Height 8.1 inches (270 x 135 x 205 mm)
Weight: Approx. 3.3 lbs (1.5 kg).
1: The number of flash tubes can be emitted by a theoretical value and may vary greatly depending on the output level and frequency of illumination. In addition, please understand that there is no light loss due to flash tube, excluding initial defects within one week of delivery, and we will repair and replace at no cost regardless of the time of purchase.
[Delivery Contents]
DM-5 main unit (with flash tube installed): 1
Dedicated protective cap: 1 piece
AC Cable: 1
Remote control: optional item. Please choose from the options.