Feature

●- This hardware provides the best solution for multi-rotor use using Simonk firmware
●- The most efficient 100% n-fet design
●- High refresh rate, without buffering the input signal, it can get a response rate of over 490Hz
●-16kHz motor frequency, provides the fastest response of the motor, quietest operation (no 8kHz ring)
●- Super simple and full operation! Nothing is programmed outside the throttle range


Description

Simonk 1 0A 12A 15A 20A 30A 40A 50A 70A 80A Opto ESC Firmware Electronic Speed Controller

-MultiRotor = Crash cutoff is not a low voltage cutoff
-Multirotor = Crash cutoffs do not exceed temporary cutoffs.
-Do not buy 30A Multirotor ESC does not meet all these standards! There are lots of low quality 3 0a esc there!

For Simonk 10a (2-3):
Weight: 10g;
Size: 23.5x15x 6.1;
Input Voltage: (2-3S lixx);
Drive current: 10a (max:13a/10s);
bec Input: 3v1a;
Compatible signal frequency: 30Hz-499Hz;

For Simonk 12a (2-3):
Weight: 12g;
Size:28*20*6.1;
Input Voltage: 2-3S lixx;
Drive current: 12a (max:14a/10s);
bec Input: 5v2a;
Compatible signal frequency: 30Hz-499Hz;

For Simonk15a (2-3S):
Weight: 15g;
Size:50*22*8;
Input Voltage: 2-3S lixx;
Drive current: 15a (max:25a/10s);
bec Input: 5v2a;
Compatible signal frequency: 30Hz-499Hz;

For Simonk 20a (2-3):
Cont: 20a;
Burst Current: 28a;
bec Model: Linear Mode
bec output: 5v3a;
li-ion/li-poly:2-3 or ni-MH/NI-CD:4-12nimh;
Weight: 21g;
Size:32*24*7mm;
Simonk 30A(2-4S):
Max cont. Current:30a;
Peak Current: 40A(10S);
Voltage: 2-3Slixx;
BEC:5V/3A;
Size:50x23x8mm;
Weight: 28g;

For Simonk 3 0A-OPTO (2-6S)
Weight: 25g;
Size:50*23*8;
Input Voltage: (3-6S lixx);
Drive current: 30a (max:40a/10s);
bec Input: No;
Compatible signal frequency: 30Hz-500Hz;
Simonk 40A(2-4S):
Weight: 35g;
Size:68*25*8mm;
Input Voltage: 2-4S;
Drive current: 40a (max:50a/10s);
bec Input: 5V 3a;
Compatible signal frequency: 30Hz-500Hz;

0A-OPTO for Simonk 5 (2-6S):
(Power from ESC receiver or flight control is required)
Weight: 48g;
Size:53*32*10;
Input Voltage: (2-6S lixx);
Drive current: 50a (max:60a/10s);
bec Input: No;
Compatible signal frequency: 30Hz-500Hz;

0A-OPTO for Simonk 7 (2-6S):
(Power from ESC receiver or flight control is required)
Weight:70g;
Size:78*38*15mm;
Input Voltage: (2-6S lixx);
Drive current: 50a (max:85a/10s);
bec Input: No;
Compatible signal frequency: 30Hz-500Hz;

0A-OPTO for Simonk 8 (2-6S):
(Power from ESC receiver or flight control is required)
Weight: 75g;
Size:78*38*15mm;
Input Voltage: (2-6S lixx);
Drive current: 50a (max:90a/10s);
bec Input: No;
Compatible signal frequency: 30Hz-500Hz;
- Flashed with Simonks famous OpenSource firmware and Super-Fast Stroettle Response firmware. Suitable for quads up to 5.5 lbs (2.5 kg), up to Octos