Features:
1.2 oz copper, 4 layers & 1.6mm PCB
2. Built-in XT60 socket
3 Total 6 pairs ESC solder tabs are suitable for H or X type frame 5V and 12V output. Indicator & Short Circuit Resistant
5 Input voltage range (3S-4S LiPo operation): 9 - 18V DC
6.6 ESC Output & 1 Pair VCC / GND Pad
Description:
1. PDB-XT60 is designed with 36*50mm & 4-layer PCB to provide the best performance and reliability.
2. It distributes power from the LiPo pack to 6 ESCs for syncing and stabilizing DC 5V output and linear stabilization DC 12V to supply power for cameras, servos, RC receivers, flight controllers, video transmitters, LEDs, etc. Provides XT60 socket for convenient connection of LiPo packs.
Specifications:
ESC Output:
Continuous current: 25A * 4 or 15A * 6
Peak current (10 seconds/minute): 30A * 4 or 20A * 6
BEC 5V Output:
Designed for RC receivers, flight controllers, OSD and servos
DC/DC Sync Buck Regulator
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 amps (up to 2.5 A 10 seconds/minute)
Output Ripple: 40mV (VIn = 16V, VOut = 5V @ 2A load)
Short circuit resistance (5 seconds/minute)
BEC 12V Output:
Designed for Video TX or FPV cameras with linear regulator. 4S LiPo (13 - 18 V DC).
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (max. 0.8A 5s/min)
Short-circuit resistance (2 seconds/minute)
BEC 12V @ 3S LiPo
Output voltage = 3 S lipo voltage -1 V
Dimension: 36 x 50 x 4 mm (without XT60)
Mounting Size: 30.5 x 30.5 mm, Φ3mm
Package information:
Package Size: 7x5x1cm
Package Size: 0.4 oz (12 g).
Plastic bag package
Package Includes:
1x Matek Systems PDB-XT60
Note:
Manual measurement error.