Equipped with 13AWG Ultra Soft Silicone Wire Standard

Comes standard with 13 AWG ultra soft silicone wire that does not interfere with the chassis roll. Flexible for a wide variety of mounting methods to ensure maximum performance on all machines.

Battery Reverse Polarity Internal Protection Circuit

Built-in battery reverse polarity internal protection circuit, even if + and - are reverse connected during battery installation, it is equipped with circuit to prevent internal circuit damage.(Note: 100% damage is not guaranteed)

Note: The use of non-polarized capacitors (30840004, 30840005) will be more likely to protect the ESC damage.By only damaging the capacitor, it is easy to prevent internal substrates.

Equipped with high voltage BEC standard

Built-in BEC supports high voltage such as HV servos Adjustable from 5.0 to 7.4 V (0.1 V step).

New protocols allow smooth setting changes and firmware upgrades

Improved firmware upgrade speed and communication speed of LCD Program Box V2 and OTA Programmers is greatly increased. The settings change is compatible with "30502001 LCD Program Box V2" and "30850400 OTA Programmer".

Optimized program for drift

High performance 32-bit M4 microprocessor is implemented for handling complex data ultra-fast and accurate response. The frequencies "PWM Frequency" which have a significant impact on throttle feeling, 1K increments from 1K to 48K, and the brake frequency "Brake Frequency" can be adjusted in 1K increments from 0.5K to 24K to suit a variety of circuits and road conditions. Note: Please use in a suitable setting that is not too much load. Abnormal heat generation of ESC and motor may be significantly mistaken in the setting and may result in damage.Please be careful.

Easily check real-time data

You can change real-time data and other settings by connecting the OTA programmer. Note: The Bluetooth transmission distance of the OTA programmer is recommended within 5m radius.Please be aware that depending on the usage conditions and equipment may affect the distance fluctuation and transmission speed.

Easy to change settings with smart phone and OTA programmer

When using OTA programmer you can use the "HW Link V2 App" to upgrade it.