Feature

●Features Flycolor FlyDragon 150A ESC 5-12S HV OPTO (set start mode) Fast throttle response and extremely smooth speed control linearity. Suitable for fixed wing and helicopter
●The front half of the rectifier master cylinder is made of aluminum alloy, high strength, not easy to deformation, avoid the blade from scratching the inner walls of the master cylinder, later replacement, upgrade to a rectifier with large flare diameter to meet the needs of fiberglass model airplanes
●Only 0.5 mm gap between the blade and the inner wall of the main cylinder, S-EDF high efficiency, uses imported carbon fiber blend material developed by a special process. The blade has a certain strength of pressure, and is not easy to deform, high-speed rotation sound clear, purely tear is not easy to break
●The use of separated blades, single blade and the mold output, the accuracy of each blade weight error is less than 0.005 grams of error and no resonance is required according to the error standard, and the motor is less than 0.005 grams, and the motor does not require much less than 0.005 grams, to ensure efficient operation. Another benefit of using the separated blade is high precision, assembly free symmetry, blade dynamic balance test convenient and flexible, fast pairing, high test pass rate
●The back of the main cylinder is made of a combination of materials with high hardness and certain toughness, and fixed with a metal motor that can remove resonance to some extent and avoid the bad effects of the normal flight of aircraft


Description

Fan Specifications and Parameters
S-EDF and Model: S-EDF 120mm
Motor Type: 5268,640KV Outside Rotation
Total power supply weight: 858g
Number of Blades: 10
Fan blade type Vortex blade type
Plug Type: Banana 6.0
Recommended battery: 6S x 2,5200 mAh, 60C
Recommended ESC: 150A

ESC Specifications
Voltage: 5-12s
Continuous Current: 150A
Burst current (10 seconds). 170A
BEC: No
Weight: 7.1 oz (203 g).
External dimensions: 5.2 x 1.9 x 1.1 inches (133 x 49

Motor equipped parameters
Motor output shaft: 0.3 inch (8 mm)
Motor Shaft Length: 0.8 inches (20 mm)
Mounting Holes: 1.2 inches (30 mm)
Motor Mounting Hole Diameter: M4

Test Standard Equipment (Push Balance)
Test battery: 12S, 5200mAh, 60C, Li-Po (fully charged).
Test current: 120A
Maximum Thrust: 18.5 lbs (8.6 kg).

Package Contents
1 x 120mm EDF
1 x 150A ESC