Feature

●DIY modified electric skateboard accessory: The ESC is an advanced adjustable electronic speed controller designed for DIY electric skateboard conversion. Flexible Programmable
●【Reliable Progressive Electric Brakes】The ESC uses sensorless motor to achieve smooth starts from stopping. It also provides strong, reliable and advanced electric brakes. You may not be able to start traditional RCESCs
●Specifications: EPRM: 60,000; PCB: 4 layers; Current: Continuous 50A / Peak 240A; Voltage: 8-60V (Can be used with 3S to 12S Lipo and the peak voltage should not exceed 60V! ); Bec:5V@1.5A; BEC Type:Internal Driver Support Motor control interface: PPM signal (RC servo), analog, UART, I2C USB or CAN bus Cut-off Voltage: Programmable;Frequency: PWM input;Motor Wire: 12AWG;Power Cord: 12AWG
●【Excellent heat dissipation】Aviation aluminum alloy heat sink, safe to use. Temperature protection and current limit protection to support multiple control modes. Packing List: 1 x Electronic Speed Control; 1 x Usb Cable; 1 x Vesc Sensor Line; 1 x Manual
●【COMPATIBILITY】ESC4.12 is based on Vesc open source projects and is compatible with Vesc software. Widely used and can be attached to a variety of products, small size and light weight, suitable for scooters, robots and other products


Description

Specifications:
Condition: 100% Brand New
Item Type: Electronic Speed Control
Color: as picture
Material: PCB board + aviation aluminum alloy heat sink + thermal silica gel + moth tube
Model: V4.12ESC Standard Configuration
Hardware: V4.12
EPRM: 60000
Firmware: V3.40 (retains the latest firmware version)
PCB: 4 layers
PCB size: approx. 40 x 60mm/1.57" x 2.36"
Current: continuous 50A/peak 240A, depends on the installation around the device and ambient temperature
Voltage: 8-60V (Can be used with 3S to 12S Lipo and peak voltage should not exceed 60V! )
Recommend 10 second battery (not included)
Bec:5V@1.5A
BEC Type: Internal Driver Support
Time:Software Adjustment
Motor control interface: PPM signal (RC servo), analog, UART, I2C
USB or CAN Bus
Cut-off Voltage: Programmable
Frequency: PWM input
Government:No
Weight: approx. 80g/0.18lb
Fsesc4.12 Size: Approx. 110x40x20mm/4.3x1.6x0.8"
Programming Card: No
Reverse: Yes
Motor Wire: 12AWG
Power Cord: 12 AWG

Package List:
1 x Electronic Speed Control
1 x USB cable.
1 x VESA Sensor Line
1 x Manual (English language not guaranteed).

Note:
By default, the LED button is factory inserted into the switch. Do not turn on the switch without connecting the LED button.