Feature

●Warranty: If you are not satisfied with our product you receive, you can email us at any time. We will reply you immediately and help you solve the problem
●The rotational potentiometer balances individual cells to reduce or expand the output pulse width to optimize performance and extend overall life
●The rotating potentiometer can amplify and decrease the output pulse width using 800-2200us signal width and 4.8-6.0v operating voltage, and a multi-function RC tester
●Test subtle variations in each steering gear. (1 msec = 1000 microns) synchronized output servo system and servo performance to control the servo and output signal accurately
●Rotary potentiometer can amplify and decrease the output pulse width. Very convenient to use and operate


Description

Specifications:
Condition: 100% Brand New
Item Type: ESC Tester
Material: Plastic + electronic components
Color: Blue
Size: Approx. 75 x 38 x 15mm / 3 x 1.5 x 0.6in (main part)
Operating Voltage: 4.8-6.0V
Signal Width: 800-2200US
1.50H Analog Servo Signal Cycle 20 US Frequency 50HZ
2. The signal cycle of one 125H digital steering gear is 8 US frequency 125Hz
3. 250H Digital Servo Signal Cycle 4 US Frequency 250HZ
Usage range:
Synchronous output control signal can be used to test the synchronization function of multiple steering engines or the difference in the rotation speed of the steering engine.
It can accurately output the signal and test if the steering gear can respond to a small pulse signal.
Test electrical adjustment and simulate oil pushing action on remote control.
Usage:
Automatically enter manual mode, turn the knob to adjust the width of the pulse signal.
Select key toggle functions (neutral, auto, manual)
Frequency Switch Key:
Cycling switching frequency (50Hz/125Hz/250Hz)
Analog Steering Gear: 50 Hz
Digital Steering Gear: 125 / 250 Hz
Quantity: 1
Application: Brushless ESC with remote control vehicles/ship/aircraft, motor, etc.
Note:
1. No back connect protection, do not backplug the power supply.
2. Digital or analog signals need to adjust the button to choose the corresponding servo system, then connect the steering servo to avoid damage to the server.
3. When testing the steering gear, you need to connect the power supply to the voltage and the output to the steering gear.
4. When measuring electrical and mechanical adjustment, you do not need to connect the power supply to voltage, connect the electrical tuning signal line to the output end.
Package List:
1 x Tester