Feature
●□Great grip and strength are enough to provide the support needed for every surf activity
●□If you prefer a wider grip on the tail, please leave the pad unfolded
●□ If you surf in the board short, it will still be soft on your knee
●□ Before using the 3M adhesive, there is less dust and the super bonding capacity is not affected
●□If there is any problem during the purchase process, please contact us at any time. We will reply you within 24 hours
[black]
Description
Brand new non-slip deck + center + tail pad set, one 5mm layer EVA, center line and two tailkick area grooves with double grooves for added grip. 3mm with tail pad and 26mm coffin arch with beveled edges. Suitable for kitesurf boards, foilboards, Wakesurf, skimmer boards.
Front Pad 64x41cm,
Center pad 4x16 inches,
Tail Pad 13.2 x 16 inches
The full pad set the gap between the pads in 8mm and size 1060x41cm. You can increase the distance between mats as needed.
9786 3M Double Coated Tape 300 MP Laminating Adhesive provides high adhesion to a wide variety of materials, including plastic and foam, and has a thin non-woven fabric liner for improved dimensional stability and improved handling.
To install the surf traction pad:
Surf traction pad
Clean surfboard
Surf Traction Pad Installation Guide:
1. In order to install the surf traction pad, the surfboard must completely free of sand, dirt, wax, and others. Sometimes stickers fit perfectly, sometimes stickers are cut in sections but not all boards are equally sized You may need to trim it. Basically, if you do not have a sticker, you want it like the wax job you slub.
2. Remember, the glue is serious. It hardens harsh elements abuse for the season or two seasons. So do not confuse the front of the rear surfboard. Oh and sadly, this must be mentioned by placing the surf tow pad on the top of the surfboard, make sure you are on the surfboard, not the bottom side. Attach strap hole, leash place and center line to the middle of the outer pad. 8mm between the middle and side of the traction pad, this is like a pen or pencil and can be used for measurement. Look at the tow pad line design on the right place and stick it on. It is a little easier if you remove the protective tape and gradually fix the pad.
3. Surf traction pads are basically an everlasting wax job that prevents your backfoot from slipping off the board. Some surfers like the extra spunsy spring they offer when you step on them for tricks, hate them when thick bubbles catch the toe. Its all up to you.