Feature

●Raspberry Pi 4 Specifications: Raspberry Pi CM4 Compute Module 4 GB RAM, 32G eMMc (CM4004032) No Wifi
●【Compare to CM3】CM4 is smaller than the CM3, not the traditional SO-DIMM laptop memory shape connector, it supports new SBC powerful processors, one row has been upgraded to a newly designed compact 2 row connector for power and low speed transmission, and the other row is for high speed data transfer.
●【High Speed & High Capacity Memory Evolution】The Raspberry Pi Compute Module 4 is extremely powerful and combines the functionality of the Raspberry Pi 4 into a compact and small board, making it suitable for embedded applications. It integrates quad-core ARM Cortex-A72 processor, dual video output, and a variety of other interfaces, providing a wide variety of optional RAM, eMMC flash specifications, and wireless modular specifications.
●【Raspberry Pi Calculation Module 4】External dimensions: 55µmmµ x 40mm;Processor: Broadcom BCM2711 Quad-Core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz;Memory: 1/2/4/8GB (depending on model number); Connection: Optional wireless LAN, 2.4GHz and 5.4GHz 0GHz IEEE 802.11b/g/n/ac Wireless, Bluetooth 5.0, BLE Onboard and External Antenna Optional Onboard Gigabit Ethernet PHY, IEEE1588 Support 1 x USB 2.0 Interface PCIe Gen 2 x1 Connector 28 GPIO Signal SD Card or External eMMC (No eMMC) Compute Module 4 Variant only) Input Power: 5V DC Operating Temperature: -20° C to +85℃

[1GB 8GB Emmc (No Wifi)]




[2GB 16GB Emmc (No Wifi)]





Description

Raspberry Pi Compute Module 4Raspberry Pi Compute Module 4

Raspberry Pi Calculation Module 4Raspberry Pi Calculation Module 4

Compute Module 4Compute Module 4

Introduction

Raspberry Pi Compute Module 4 harnesses the compute power of the popular Raspberry Pi 4 Model B, bringing it to a smaller form factor suitable for integration into products.

Raspberry Pi Compute Module 4 incorporates a quad-core ARM Cortex-A72 processor, dual video output, and a wide selection of other interfaces. Available in 32 variants, with a range of RAM and eMMC Flash options, and with or without wireless connectivity.

Specifications

PROCESSOR: Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC 1.5GHz

MEMORY: 1GB, 2GB, 4GB or 8GB LPDDR4 (depending on variant)

STORAGE: 0GB (Lite), 8GB, 16GB or 32GB eMMC Flash (depending on variant)

CONNECTIVITY

-Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, Bluetooth 5.0, BLE with onboard and external antenna options

-Onboard Gigabit Ethernet PHY supporting IEEE1588

-1 x USB 2.0 interface

-PCIe Gen 2 x1 interface

-28 GPIO signals

-SD card interface for SD card (for use only with Compute Module 4 variants without eMMC)

Raspberry Pi CM4Raspberry Pi CM4

Raspberry PiRaspberry Pi

raspberry pi cm4 literaspberry pi cm4 lite

VIDEO

-Dual HDMI interface (up to 4Kp60 supported)

-2-lane MIPI DSI display interface

-2-lane MIPI CSI camera interface

-4-lane MIPI DSI display interface

-4-lane MIPI CSI camera interface

MULTIMEDIA: H.265 (4Kp60 decode); H.264 (1080p60 decode, 1080p30 encode); OpenGL ES 3.0 graphics

INPUT POWER: 5V DC

OPERATING VOLTAGE: -20°C ~ 85°C ambient

Dimensions: 2.2 x 1.6 x 0.1 inches (55 x 40 x 4.7 mm)

Completely Upgraded Introduction

-Upgraded processor BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC, more powerful performance

-More options for RAM (1GB/2GB/4GB/8GB), competent for large-scale data compilation

-Faster eMMC Flash storage, up to 100 MBytes/s data rate, which is four times faster than the CM3+

-Option for fully certified radio module, the same one used on Pi4B, supports either PC