[sapphire]

Description: Product Name: Heat Shrink Hippo Film Length: 6.6 ft (2 m), 16.4 ft (5 m), Width: 23.6 inches (60 cm), Thickness: 0.05 mm Color: Multi-Color Selection Features: Super strong, high tensile strength Approximately 100 g/m² Lightweight with excellent adhesive when applied wrinkles Free around curved surfaces and corners Shrinks snugly on the drum after cooling. Keep your model in perfect condition. Glossy Finish, Waterproof, Flame Resistant Multi-Color Selected To Use: Peel off the protective film first, place the film on top of the RC frame, heat the frame with a hot iron or hot hair dryer, work with cement and then stick the film to the film. Iron, when heated, the film shrinks and finally forms a tight and smooth outer skin. Iron heating methods may differ, please test the sample first. Reference temperature: 1.At low temperature between 100℃ and 120℃, it can be stick to wood board. 2. Medium temperature of 150 degrees Celsius is the best adhesive temperature. 3. The hippo may shrink at high temperature of 180 degrees Celsius. 4. If the radian is too large and difficult to stick, the temperature can be adjusted properly above 180 degrees Celsius, but can not exceed 250 degrees Celsius. Note: There may be chromatic aberration due to the computer display, this is not a quality problem. Package Included: 1 x Hippo Flim