Introducing the final time of the attack of Yamatsu, and the 19th 19.
The light cruiser ship "Yatun" was created as the Agano-type No. 3 ship at Saseho Navy Kosu during December 18.
The Agano shape is planned as a water minerial squadron flagship and features a modern look and weapon that stands out from the previous 5,500 ton type.
The main gun was equipped with 3 5.9-inch (15 cm) continuous guns, and 2 newly developed 3.1-inch (8 cm) high angle guns.
After the morphic working, he participated in the major battle of the Coast of Reite, the battle of Mariana.
Sewing between them to enhance their anti-air arms.
In April 20, the Tenichi Operation responds to the US armies landed in Okinawa in April 20, it was attacked as a 2nd Mercury Sentai flagship to defend the Battleship Yamata, and it was submerged on the way to Okinawa.
● Product can be selected in multiple annual states.
The last appearance of the Ten 1 issue in April 20, which was released to Okinawa along with Yamatoa, with 28 25mm single-weapons.
After the Marina offshore sea battle from June 19, 18 1.0 inch (25 mm) single-body guns before changing the shape of the aircraft work deck.
It is said that the mono-gun was not enhanced during the battle of the Marina offshore sea in June 19.
You can choose from 2 kinds of quality parts of the 96 type 1.0 inch (25 mm) machine gun (3 and single load).
The barrel and cradle have been designed with a precision shape that makes painting easy.
The molded color is gray, and the barrel is gun metallic so you can color code it without painting.
By combining the cradle and the barrels runner, it stays in the adhesive position, and the gate cutting is designed to be used with a poured adhesive.
The 3-row aircraft gun has separate parts for further precision construction.
The other type is enclosed with a traditional one-piece design.
The modern Agano-shaped shape is different from the flow of Japanese light cruisers.
The hull body is glued on the left and right to recreate the appearance of the fender window is obstructed and decreased in the number of fenders.
The outboard train runs all the way around the fender, has a delicate sculpture that reproduces even the fastener part.
Each layer of the deck and the hull bridge has been reproduced with a variety of carvings such as holding hardware and anti-slip strips that represent linoleum beds.
The shelter part of the front of the klebridge is transformed into a single piece using a sliding mold. Detailed sculpting and sculpting on sidewalls
The main turret is a sliding mold that reproduces windows, rattar and steel plate joints.
The lattice on the top of the chimney is removed, and the interior rectifier has also been recreated using separate parts.
The chimney is glued on the left and right side, and the monkey rattar is also engraved. Each steam disposal pipe is an independent part to express the difference between a sister ship
The triangular truss at the bottom of the mast are released using a slide mold.
The small crane located on the rear end of the aircraft work deck has been reproduced in 3D and accurately with different parts.
The 4.5 meter high angle angle adjustment glove has precise cylindrical arm shape and is enclosed as a dedicated part.
No. 22 electric prophes, fender ladders (retractable), azimuth detector antenna, supplementary wing storage station, etc., have been transformed into parts without having to remove any excess parts.
The 3.1 inches (8 cm) long consecutive high angle gun has been transformed into separate parts for the shield and the barrel as a newly designed product.
The water connaissance lift crane reproduces light holes on the sides for increased precision.
The equipped water connaissance machine includes 2 zero-type (three-seat) water reconnaissance aircrafts. Molded color is gray.
Comes with 2 types of decals
Included decals are 2 types of decals that include marking on the warship flag, sunsigna and ship aircraft
·We have 3 sizes of military ship flags, etc. Actual dimensions of 10, 6, and 3 width are 1/700 scale.
It includes the Hinomaru of the ship aircraft and the corresponding yellow belt (yellow band), and the Hinomaru includes those that do not have the white border during the late of the War.
Decals include watering notation, chrysanthemum crest of the ship of the ship (two types of gold and warship color filled).
Includes parts that correspond to the annual changes of the arrows are included.
The shaft of the high angle angle adjustment gloves has been transformed into different parts to accommodate shape changes during the 19 and 20 years.
The aviation work deck corresponds to the shape of the opening, and is compatible with 2 types of annual difference.
The deck around the kletail has two types of special parts to recreate different rigging products depending on the time of year.
Two types of David in front of the kanbridge are available for expansion and storage. The former was used for 19 and the ship is not affiliated.
Reproduces the characteristic of the 3rd ship Yasuni that is different from the sister ship.
The Kanbridge has been designed to clearly reproduce the differences in shape as a dedicated part for arrows.
The main canopy, unlike liquor smell, is a special part that is small on the front left side of the canopy.
The molded parts are available in 3 colors: gray, transparent and gun-metallic colors that mimic the Kureko Yaku.
Number of assembly parts: 208 pieces (when in 1975)
Included Accessories:
Runners x 29, assembly instructions x 1, decals x 2.
This product is manufactured in Japan.
This is a plastic model kit that requires assembly.
No