The Agano-type second ship Noyo, which was built after 20 years from the 5,500t type Karuku.
Products are unpainted kits that require glue assembly and painting.
The scale is 1/700, and the bottom of the ship is not included.
This product uses conventional (special series) molds.
The light cruisers "Noyo" was founded in September 16, before the first opening as Agano-type No. 2 ship, and was worked in June of 18, mid-war period.
The same type of ship was built in Saseho Navy Koyaku, and only Noi would be built in Yokosuka Navy Koyaki.
The predecessor of the Agano shape is the Kawaichi style with 20 years intervals, making it a modern ship of the companion.
With a standard drainage capacity of 6,652 tons, a total length of 5.9 ft (172 m) and a large size of 5.9 inch (15 cm) round guns, and 2 newly developed 3.1 inch (8 cm) high angle guns.
Nori became a flagship of the Second Water Minute Squadron after the Japanese worked in the transportation and defense operations of the Central Pacific. In June of 19, he participated in the ocean battle of the coast of Mariana.
Before and after this, the extra equipment of machinearms and some electro probe have been strengthened.
In October 19, it was joined with the main forces such as Yamata, Musashi, etc. by the Shiichi series operations in the Sea Battle of Reite.
In the battles with the US Air Aircraft Carrier he went to take away direct shots and be torn by the aircraft attack.
The product can be reproduced in the final form of October 19, and the battle of the Laite.
Equipped with a No. 21 electric detection, a No. 22 electric detection, and a No. 13 electric search from the time of the work.
18 guns with 1.0 inch (25 mm) guns are equipped with 10 guns with a pistols installed in the fleet.
You can choose from 2 kinds of quality parts of the 96 type 1.0 inch (25 mm) machine gun (3 and single load).
The barrel and cradle have been designed with a precision shape that makes painting easy.
The molded color is gray, and the barrel is gun metallic so you can color code it without painting.
By combining the cradle and the barrels runner, it stays in the adhesive position, and the gate cutting is designed to be used with a poured adhesive.
The 3-row aircraft gun has separate parts for further precision construction.
The other type is enclosed with a traditional one-piece design.
The modern Agano-shaped shape is different from the flow of Japanese light cruisers.
The hull is glued on the left and right to recreate the fine molding of the fender.
The outboard train runs all the way around the fender, has a delicate sculpture that reproduces even the fastener part.
Each layer of the deck and the hull bridge has been reproduced with a variety of carvings such as holding hardware and anti-slip strips that represent linoleum beds.
The shelter part of the front of the klebridge is transformed into a single piece using a sliding mold. Detailed sculpting and sculpting on sidewalls
The main turret is a sliding mold that reproduces windows, rattar and steel plate joints.
The lattice on the top of the chimney is removed, and the interior rectifier has also been recreated using separate parts.
The chimney is glued on the left and right side, and the monkey rattar is also engraved. Each steam disposal pipe is an independent part to express the difference between a sister ship
The triangular truss at the bottom of the mast are released using a slide mold.
The small crane located on the rear end of the aircraft work deck has been reproduced in 3D and accurately with different parts.
The 4.5 meter high angle angle adjustment glove has precise cylindrical arm shape and is enclosed as a dedicated part.
No. 22 electric prophes, fender ladders (retractable), azimuth detection antenna, and supplementary wing stall are made into parts without having to remove any excess parts.
The 3.1 inches (8 cm) long consecutive high angle gun has been transformed into separate parts for the shield and the barrel as a dedicated design.
The water connaissance lift crane reproduces light holes on the sides for increased precision.
The equipped water connaissance machine includes 2 zero-type (three-seat) water reconnaissance aircrafts. Molded color is gray.
Comes with 2 types of decals
Included decals are 2 types of decals that include marking on the warship flag, sunsigna and ship aircraft
·We have 3 sizes of military ship flags, etc. Actual dimensions of 10, 6, and 3 width are 1/700 scale.
It includes the Hinomaru of the ship aircraft and the corresponding yellow belt (yellow band), and the Hinomaru includes those that do not have the white border during the late of the War.
Decals include watering notation, chrysanthemum crest of the ship of the ship (two types of gold and warship color filled).
Special parts of the Northern Federation have been made into special parts.
The fender side has been made to replicate the appearance of the fender window from the time of Agano.
Includes parts for the 1 to 3 ship with no large sighting hand window on the front of the main turret is included.
The aviation work deck has a special part for shape differences including the opening.
The chimney and steam disposal pipe have been made specifically to reproduce the difference of individual warps.
The high-firing device base is shaped in a different angular shape from Agano and Noyo.
The parabane on the side of the first turret is specially prepared for square objects.
The front of the compass Kanbridge includes parts that do not have bluework than Agano.
The molded parts are available in 3 colors: gray, transparent and gun-metallic colors that mimic the Kureko Yaku.
Number of assembly parts: 200
Included Accessories:
Runner x 25
Assembly instructions x 1
Decal x 2
This product is manufactured in Japan.
This product is a plastic model kit that requires assembly.
No