[600 1.0mm]

[1200 4.0mm]

Material: Diamond
The sculpture of jade is finely polished and has a good effect. After repair, the jade sculpture workpiece is just as fine and delicate.
Vibrations are hand polished to greatly save human hand and precision of processing is the same as before.
Process: Oil Stone Polishing or Polishing
Tips for use: The sculpture should be clean, not too rough or light. Repeat 2-3 times to cool the wet water and a speed of 2,000 to 3,000.
Shank: 2.35mm
Gart: 600#/ 1200#
Shape: Cylinder
Head Size: 1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 4.0 mm
Application:
Tips: When using diamond tools, please pay attention to the following:
1 When installing new tools, you need to test if the tool is working. You will not be able to work directly when you jump. Can be adjusted to not use. Otherwise, the tool will wear out quickly and the carved items will not be very smooth. Adjustment Method: Use a small wrench to replace the fast tool holder until the tool is smooth. Electronic theft is strictly prohibited. Adjustment method is to loosen the chuck or turn the tool diagonally or stretch.
2. Need to be cooled with water (similar to hospital drips) For example, a diamond on the tool head is graphitized by overheating, and it will wear out quickly and become scraped.
3 Avoid shaking when drilling Shake will cause partial damage to the tool and accelerate damage to the whole tool.
4 The speed is as fast as possible. Line speed usually needs to be more than 10-20 meters per second.
5 A light pressure supply, diamond tools are ground to handle work pieces. Excessive force, grinding cannot be easily removed and are prone to damage tools (especially small tools).