[Rear  & U Clamp]

It is not afraid of self-service as well.
The rear stand is safe and easy to use, even if you are worried about using the rear stand alone.
Adopts a U-shaped attachment with a binecamp mechanism to avoid situations where the stand may come off from the spool.
You can easily lift up your vehicle with one touch.
Spring clamped even when lifted down, so the stand wont come off due to recoil when the car is lowed.
Compatible with spools of φ0.6 - 0.7 inches (14 - 18 mm) (recommended diameter 0.7
5 height adjustments and stepless width adjustment make it compatible with a wide range of vehicles.
Lift Height: 10.6 - 13.6 inches (270 - 345 mm) (5 levels)
Compatible Arm Width: Approx. 10.2 - 15.7 inches (260 - 400
Load Capacity: 440.5 lbs (200

You will need to purchase a swingarm spool with a diameter of 0.7 inch (18 mm) of the dent part separately.
Cannot be used with spools with diameter of 0.7 inch (18 mm) or more.
Spools with a diameter of 0.7 inch (18 mm) or less will not work well with the clamping function.
The spring effect of the clamp will be difficult to return due to deterioration over time. In that case, we recommend you to replace it.
Please adjust the height of this product to the extent that the rear tire floats slightly. Too high, the stand is difficult to hang and unstable.
Cannot be used with swingarms such as different steps on left and right.