Feature

●The DG-1 is a derailleur guard for road cross bikes and MTB which can be used in conjunction with a 9mm quick release that holds the rear wheel or bolted into a 12mm thru axle (sold separately). By attaching it, you can prevent the derailleur from accidentally bumping into obstacles or bending the end fittings. For use with 9mm quick and 12mm thru axles. Will not fit any other size or mounting wheel After installation, move the derailleur from low to top and fine-tune it to a position (angle) that does not touch the DG-1. The derailleur is unable to perform with limited movement when contact. The DG-1 will loosen together if you loosen the quick such as removing the rear wheel for transportation. Be careful not to lose it. Also, please make sure to properly align and install it when reinstall. The DG-1 is made of steel with a painted finish. It may rust if hit and scratched. Touch up paint and repair


Description

The DG-1 is a derailleur guard for road cross bikes and MTB which can be used in conjunction with a 9mm quick release that holds the rear wheel or bolted into a 12mm thru axle (sold separately). By attaching it, you can prevent the derailleur from accidentally bumping into obstacles or bending the end fittings. For use with 9mm quick and 12mm thru axles. Will not fit any other size or mounting wheel After installation, move the derailleur from low to top and fine-tune it to a position (angle) that does not touch the DG-1. The derailleur is unable to perform with limited movement when contact. The DG-1 will loosen together if you loosen the quick such as removing the rear wheel for transportation. Be careful not to lose it. Also, please make sure to properly align and install it when reinstall. The DG-1 is made of steel with a painted finish. It may rust if hit and scratched. Touch up paint and recover.